Unit includes: Car Amplifier, Mounting hardware, and Instruction manual
KICKER's CX-Series Amplifiers are full of advanced technoglogy. Under the high-mass, super-cooling heat sink, these amps feature double-sided fiberglass circuit boards, Litz-wound transformers that minimize power loss and maximize transfer, TO218 output devices for high-current switching, buffered RCA outputs, noise-shielding metal-end panels, and custom tooled power connectors.
Even More Compact
CX Amplifiers are no strangers to the KICKER tradition of compact size. Featuring an optimized circuit layout for the most efficient use of components and clearest sound quality, CX Amplifiers set the curve for smaller footprints with monoblock models measuring under 12-1/2 inches long.
Kicker CX600.1 600 Watt RMS Single Channel Class D Car Amplifier:
CX Series 600 Watt RMS Single-Channel Class D Car Amplifier
Preamp RCA outputs to connect multiple amps
MOSFET power supply for large power output
LED power (green) and protect (red) indicators
balanced differential inputs and Fail-Safe Integration Technology eliminate noise from your vehicle's electrical system
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Vertical mounting optional
Heavy duty aluminum alloy heat-sink
Nickel-plated screw terminals
CEA-2006 compliant amplifier
4-gauge power and ground leads and a 150-amp fuse recommended
Frequency Response: 25Hz to 200Hz +/- 1.0dB
Inputs and Outputs:
Nickel-plated RCA level inputs and outputs
Input Sensitivity Low level: 125mV-5V
Input Sensitivity High level: 250mV-10V
Max Power Output:
Total Power Output: 1,200 Watts
RMS Power Output:
4-Ohms: 300 Watts x 1
2-Ohms: 600 Watts x 1
Built in Crossover:
Low Pass: 50Hz-200Hz @ 12dB/octave
Overall Dimensions: 2-3/8" (H) x 8-1/8" (D) x7-3/16" (W)
Amplifier Topology Class
Number of Channels
Total Peak Power Output
Total RMS Power Output
Bridgable @ 4 ohms
Minimum Impedance in Bridged Mode
Minimum Impedance in Un-Bridged Mode
Strappable Power Output
RCA Pre-amp Audio inputs
RCA Pre-amp Audio outputs
Speaker level inputs
Bass Knob / Remote Gain
Built in Crossover
Recommended Power Wire Gauge
Write Your Own Review
Ask questions receive answers.
Have a question? Go ahead and ask anything. We are here to help.
We show you how to properly wire subwoofers. There are many options with dual and single voice coil subwoofers and they all present different loads to your amplifier. We show you the do's and don'ts!
Learn the basics of an aftermarket car stereo installation. First we walk you through a step by step process of the wiring harness installation, then we show you how to mount the units using a dash kit.
Amplifiers are power hungry devices that are the heart of every car audio system. A power line fuse on your amp is essential because without one you could have a fire if the power wire is accidentally shorted. We show you how to properly wire a fuse at the battery of your vehicle.
We show you how to set the gains on your amplifiers correctly using an inexpensive oscilloscope. Using the DSO Nano V3, we demonstrate what amplifier clipping looks and sounds like. We then demonstrate how to set your system up the right way and prevent these damaging issues.