For Expert Advice call 800-363-0096 Click to see our hours Contact Us

Marine Amplifiers

Marine amplifiers are durable weather resistant units designed to power electronic audio devices through the harshest outdoor conditions such as rain and heat.

Items 1 to 15 of 46 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction
  1. Rockford Fosgate M400-4D

    • 400 Watt 4-channel high efficiency Class-D amplifier specifically designed for Marine and Power-sports applications
    • 75 Watts x 4 @ 4-Ohm
    • Pulse Width Modulated MOSFET power supply
    • Variable 12dB/octave Butterworth crossover
    • 2/3/4 channel operation
    • 4 Gauge power / ground connectors
    • Cast aluminum heatsink for effective heat dissipation
    • Tri-stage protection that covers thermal, over-circuit and short circuits
    Your Price: $299.99

    - Add to Wishlist

     Compare
  2. Rockford Fosgate M600-4D

    • It has a 12dB/octave Butterworth crossover with 2/4 channel input switch.
    • It has a 4 Gauge power/ground connectors.
    • It features a cast aluminum heatsink for effective heat dissipation.
    • It comes with top mounted controls.
    • It includes a tri-stage protection that covers thermal, over-circuit and short circuits.
    Your Price: $449.99

    - Add to Wishlist

     Compare
  3. Rockford Fosgate M600-5

    • It includes a Remote Punch Level Control (sub channel) and on board Punch EQ control as standard.
    • It offers a MOSFET power supply.
    • It enables an over current and short circuit protection.
    • It comes with separate Front, Rear and Sub gain control.
    • It features marine grade two part epoxy coating on circuit boards.
    Your Price: $499.99

    - Add to Wishlist

     Compare
  4. Rockford Fosgate M750-1D

    • It has a 12 db/octave Butturworth crossover.
    • It features a cast aluminum heatsink for efficient heat dissipation.
    • It comes with top mounted controls.
    • It includes a tri-stage protection that covers thermal, over-circuit and short circuits.
    • It has infrasonic filter and a remote punch level control.
    • It offers one-year warranty.
    Your Price: $399.99

    - Add to Wishlist

     Compare
  5. Rockford Fosgate M1200-1D

    • It has 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
    • It features a cast aluminum heatsink for effective heat dissipation.
    • It comes with top mounted controls for ease of use.
    • It features a tri-stage protection covers thermal, over-current and short circuits.
    • It includes an infrasonic filter and remote PLC (Punch Level Control).
    • It delivers 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
    Your Price: $499.99

    - Add to Wishlist

     Compare
  6. Kicker 42PXA2002

    • Two-channel 200 Watt RMS amplifier
    • 25 watts RMS x 2 Channels at 4 ohms
    • High level input capable with an Auto Turn-On circuit
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • Selectable high pass: 60Hz / 80HZ / 120Hz (12dB/octave)
    Your Price: $199.95

    - Add to Wishlist

     Compare
  7. Kicker 42PXA2001

    • Single-channel 200 Watt RMS amplifier
    • 100 watts RMS x 1 Channels at 1 ohms
    • High level input capable with an Auto Turn-On circuit
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • On-board KickEQ™ and Remote CXRC Level Control ready
    Your Price: $199.95

    - Add to Wishlist

     Compare
  8. Kicker 42PXA5001

    • Single-channel 500 Watt RMS amplifier
    • 500 watts RMS x 1 Channels at 2 ohms
    • High level input capable with an Auto Turn-On circuit
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • On-board KickEQ™ and Remote CXRC Level Control ready
    Your Price: $299.95

    - Add to Wishlist

     Compare
  9. Rockford Fosgate PM1000X1BD

    • 1000 Watt Punch Series 1-Channel Class BD Marine Amplifier
    • 1000 watts RMS x 1 Channels at 1 ohms
    • High level input capable with an Auto Turn-On circuit
    • On-board Punch equalizer and is remote Punch Level Control ready
    • Hidden top mounted control panel and a cast aluminum heatsink
    Your Price: $649.99

    - Add to Wishlist

     Compare
  10. Rockford Fosgate PM500X1BD

    • 500 Watt Punch Series 1-Channel Class BD Marine Amplifier
    • 500 watts RMS x 1 Channels at 1 ohms
    • High level input capable with an Auto Turn-On circuit
    • On-board Punch equalizer and is remote Punch Level Control ready
    • Hidden top mounted control panel and a cast aluminum heatsink
    Your Price: $449.99

    - Add to Wishlist

     Compare
  11. Rockford Fosgate PM300X1

    • 300 Watt Punch Series 1-Channel Class AB Marine Amplifier
    • 200 watts RMS x 1 Channels at 4 ohms
    • High level input capable with an Auto Turn-On circuit
    • On-board Punch equalizer and is remote Punch Level Control ready
    • Hidden top mounted control panel and a cast aluminum heatsink.
    Your Price: $299.99

    - Add to Wishlist

     Compare
  12. Kicker 42PXA3004

    • Four-channel 200 Watt RMS amplifier
    • 50 watts RMS x 4 Channels at 4 ohms
    • High level input capable with an Auto Turn-On circuit
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • Selectable high pass: 60Hz / 80HZ / 120Hz (24dB/octave)
    Your Price: $299.95

    - Add to Wishlist

     Compare
  13. Kicker 40PXiBT502

    • Add an audio system without a radio or headunit
    • Two-channel 50 Watt RMS amplifier
    • 15 watts RMS x 2 Channels at 4 ohms
    • Bluetooth enabled remote control keypad controls the amplifier
    • Back-lit buttons
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • 3.5mm headphone jack low level input
    Your Price: $249.95

    - Add to Wishlist

     Compare
  14. Kicker 42PXiBT1002

    • Add an audio system without a radio or headunit
    • Two-channel 200 Watt RMS amplifier
    • 50 watts RMS x 2 Channels at 2 ohms
    • Bluetooth enabled remote control keypad controls the amplifier
    • Back-lit buttons
    • Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
    • 3.5mm headphone jack low level input
    Your Price: $349.95

    - Add to Wishlist

     Compare
  15. Boss Audio BR1000

    • Full Range Class AB Weather-proof amplifier
    • 4/3/2/1 channel output to drive four speakers or a two subwoofers
    • Includes subwoofer level controller
    • Waterproof with conformal coated circuit board and UV coatings
    • MOSFET regulated power supply
    • 94 watts RMS x 4 channel at 4-Ohms
    Your Price: $139.99

    - Add to Wishlist

     Compare

Items 1 to 15 of 46 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction

Marine amplifier considerations:

Marine amplifiers need to be more durable than those found in your car, and they need to be sealed against the elements effectively. Despite the enclosures this part of your audio system is generally encased in, there is a vital need for additional protection due to the environments these amplifiers are regularly exposed to.

Water

Because of being on the water, marine amplifiers need to be protected against the shorting out effects of that water. Your amplifiers will be encased in a covering that is rated to be waterproof, which means that they can be submerged without being damaged. This is distinct from being called "water resistant," which means that splashes will not cause damage while submersion will. Further, many marine amplifiers also have circuitry that is coated in specialized plastics or other films that keep water from shorting out the electrical connections.

Particles

Particulate matter such as dirt and sand can rapidly corrode electrical components. Because of this, marine amplifiers are generally treated with a sort of armor over the delicate components that keeps away particles. Further, this protects the components from physical damage caused by particles that are moving at high speed, since by definition boats are designed to move and can disturb sediments at high speed.

UV Radiation

UV or ultraviolet radiation is not as large a problem for marine amplifiers as it is for more exposed types of audio components, but it is still an issue. This is particularly the case because on board a boat, the level of UV is amplified by the reflected sunlight coming off of the water. This can cause components to become brittle, even breaking electrical connections. UV treatments can involve specialized coatings, thicker than average connections and more insulation than would be necessary in a less exposed area.

Shock

Boats move, often at high speeds, and are often subjected to additional movement caused by waves and heavy winds. Shocks of this nature can cause electrical components to break their loop due to losing a connection between parts. An unreliable connection can also be the cause of a fire that can be difficult to put out, or can even result in electrical shocks that can cause personal injury to people. Because of this, additional anchoring for marine amplifiers is necessary. As well, there need to be sturdier connections within the marine amplifiers than would be necessary within a land vehicle.