DISCONTINUED - Kicker 40KXM1200.1 1200 Watt KXM Series Marine Class D Mono-Block Amplifier
- Kicker 40KXM1200.1 KXM Series Mono-Block Class-D Marine Amplifier with 1200 Watts of power!
- MOSFET power supply
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 600 watts x 1 channel
Built for moisture
The Kicker 40KXM1200.1 amplifier was built for the harsh marine environment. All exterior connections are gasket sealed to prevent water from entering the amplifier. To prevent damage if water does get in the circuit board has been sprayed with a moisture deterrent conformal coating to prevent damage. All hardware and connections are stainless steel to prevent rust and corrosion. The amplifier chassis is even treated with a UV coating to prevent damage from the sun!
Fits anywhereThe 40KXM1200.1 Marine amplifier is designed to fit virtually anywhere! The optimized circuit board keeps the footprint small and provides the best sound quality. To ensure top audio quality, the 40KXM1200.1 uses balanced differential inputs providing the best ability to reject unwanted noise and makes them compatible with any radio. The 40KXM1200.1 Amp utilizes class-leading features specific for unbelievable sound in the boating environment.
Kicker 40KXM1200.1 1200 Watt KXM Series Marine Class D Mono-Block Amplifier- Features:
- Kicker KXM Series Mono-Block Class-D Marine Amplifier with tons of power!
- Designed with MOSFET power supply for high current levels and improved sound quality
- Single LED indicator: red for power
- Includes wired remote bass level control
- Gasket sealed power, speaker, and input connections
- Equipped with FIT (Fail-Safe Integration Technology) to accept output from virtually any source
- FIT’s lab-grade, balanced differential inputs offer best possible noise rejection
- Integrated heavy-duty aluminum alloy vented heat sink for maximum heat dissipation with Kicker logo
- Equipped with soft start turn-on that helps reduce the load and makes start-up easier
- Maximum Power output is 1200 watts
- Mono-Block channel operation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- Internal circuit board is sprayed with a moisture-deterring conformal coating
- Remote turn on is auto signal sense or 12 volt trigger
- Silver nickel plated RCA outputs for daisy chaining of multiple amplifiers
- Silver nickel-plated RCA level inputs
- Silver nickel-plated screw terminals
- Daisy-chain multiple amplifiers together without signal loss with integrated audio outputs
- Requires 4 gauge power and ground wiring for installation
- Input sensitivity: 125 mV to 5V (Low level) and 250 mV to 10V (High level)
- Variable low-pass filter: 40-160 Hz, 24 dB/ octave
- Kick EQ Bass boost: 0 to +18dB Adjustable bandwidth: 1 - 5 and Variable center: 20 - 80 Hz
- Variable sub-sonic filter from 10 Hz - 80Hz, 24 dB/ octave
- Frequency response: 10 Hz - 160 Hz
- Signal to Noise ratio: >95dB
- Total Harmonic Distortion: <0.05%
- Recommended fuse rating: 80 amp
- Dimensions: 9-9/16" (L) x 2-1/8" (H) x 8-5/16" (W)
Maximum Power Rating:
- 4 ohms: 600 watts x 1 channel
- 2 ohms: 1200 watts x 1 channel
Manufacturer | Kicker |
---|---|
Part Number | 40KXM12001 |
Amplifier Topology Class | Class D |
Number of Channels | 1 Channel |
Amplifier Bridging | Not Bridgable |
Minimum Impedance in Un-Bridged Mode | 2 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio outputs | 1 Pair |
Preamp voltage | 150 mV - 11 V |
Speaker level inputs | No |
Gain Control | Yes |
Bass Knob / Remote Gain | Yes |
Built in Crossover | Low-pass |
Cooling Fan | No |
Color | Silver |
Warranty | 2 Years |
CEA2006 Compliant | No |
UPC Code | 713034074731 |
Return period | 30 days |
Exchange period | 30 days |