Rockford Fosgate M1200-1D 1200 Watt Marine Class-D Mono Amplifier
Expert Knowledge
Talk to a specialist
- It has 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
- It features a cast aluminum heatsink for effective heat dissipation.
- It comes with top mounted controls for ease of use.
- It features a tri-stage protection covers thermal, over-current and short circuits.
- It includes an infrasonic filter and remote PLC (Punch Level Control).
- It delivers 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
Rockford Fosgate M1200-1D 1200 Watt Class-D Mono Amplifier:
Features:
- 12dB/octave Butterworth crossover
- 4 Gauge power/ground connectors
- Cast aluminum heatsink
- Top mounted controls
- Marine grade 2-part epoxy coated PCB
- On-board Punch EQ with +18dB boost @ 45Hz.
- Tri-stage protection covers thermal, over-current and short circuits.
- Infrasonic filter
- Remote PLC (Punch Level Control)
- 1 Year Standard Warranty
Inputs and Outputs:
- 1 RCA pair low level input
- 1 RCA pair low level output
- Block 4 AWG speaker input connections
- Block 12 AWG speaker output connections
RMS Power Output:
- 4-Ohm: 600 Watts x 1
- 2-Ohm: 900 Watts x 1
- 1-Ohm: 1200 Watts x 1
Built in Crossover:
- Variable 50Hz - 250Hz @ 12dB/octave
Dimensions:
- Overall Dimensions: 1.97” (H) x 6.77” (D) x 11.06” (W)
| Manufacturer | Rockford Fosgate |
|---|---|
| Part Number | M1200-1D |
| Amplifier Topology Class | Class D |
| Number of Channels | 1 Channel |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 1 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio outputs | 1 Pair |
| Preamp voltage | 4 volts |
| Speaker level inputs | No |
| Gain Control | No |
| Bass Knob / Remote Gain | No |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | White |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 8 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 780687340797 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
