Rockford Fosgate M600-5 600 Watt Full-Range Class-AB/D 5-Chanel Amplifier
Expert Knowledge
Talk to a specialist
- It includes a Remote Punch Level Control (sub channel) and on board Punch EQ control as standard.
- It offers a MOSFET power supply.
- It enables an over current and short circuit protection.
- It comes with separate Front, Rear and Sub gain control.
- It features marine grade two part epoxy coating on circuit boards.
Rockford Fosgate M600-5 600 Watt Full-Range Class-AB/D 5-Chanel Amplifier:
Features:
- Class A/B technology (4 channel)
- Class-D technology (sub channel)
- Remote Punch Level Control (sub channel) included
- RCA and high level input with 2/4/5 channel select
- 12 dB/Oct Butterworth crossovers
- On board Punch EQ control
- Separate Front, Rear and Sub gain control
- Real time output and power supply thermal sensing
- Cast aluminum heat sink
- 4 AWG power/ground connectors
- MOSFET power supply
- Over current and short circuit protection
- Marine grade two part epoxy coating on circuit boards
- Muted turn on
- 1 Year Standard Warranty
Inputs and Outputs:
- 3 RCA pair low level input
- Block 4 AWG speaker input connections
- Block 12 AWG speaker output connections
Max Power Output:
- 500 Watts
RMS Power Output:
- 4-Ohm: 50 Watts x 4 + 200 Watts x 1
- 2-Ohm: 75 Watts x 4 + 300 Watts x 1
- 4-Ohm: Bridged 150 Watts x 2
Built in Crossover:
- Front Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
- Rear Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
Dimensions:
- Overall Dimensions: 1.98” (H) x 6.77” (D) x 13.99” (W)
| Manufacturer | Rockford Fosgate |
|---|---|
| Part Number | M600-5 |
| Amplifier Topology Class | Class AB |
| Number of Channels | 5 Channel |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio outputs | 3 Pairs (Front, Rear, Sub) |
| Preamp voltage | 6 volts |
| Speaker level inputs | Yes |
| Gain Control | No |
| Bass Knob / Remote Gain | No |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | White |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 8 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 780687343408 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
