We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Axxess - Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Metra AXDI-GM3 Economy Data Bus interface with Chime Retention Speaker for 1996 - 2005 Cadillac vehicles$89.99- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Used in models without OnStar or when not retaining OnStar
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- For select Cadillac vehicles
-
Axxess AX-MB1-SWC 2001 - and Up Mercedes Benz radio replacement interface with steering wheel and navigation outputs$110.99Out of stock- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-VW903 2008 - 2016 Volkswagen radio replacement interface with steering wheel, navigation outputs and display retention$111.99Out of stock- Provides RAP , navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Perfect for use with car stereos featuring non-amplified systems or when replacing amplified systems
- Includes ASWC-1 connector
- 12 volt 10 amp car accessory
- USB device can also connected
-
Axxess VWTO-01 Fender System Accessory and NAV Output CAN Interface for Volkswagen 2011-Up$111.99- Provides RAP , navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Perfect for use with car stereos featuring non-amplified systems or when replacing amplified systems
- Includes ASWC-1 connector
- 12 volt 10 amp car accessory
- USB device can also connected
-
Axxess AXDI-VET1 Car Stereo replacement interface for 1997 - 2004 Corvette with factory Amplifier$115.99- Easily replace the factory radio in 1997 - 2004 Corvette with factory amplifier
- Retains door woofers
- Provides all connections to factory wiring
- USB firmware updatable
-
Axxess AXDI-SP1 2007 - 2013 Sprinter Van Data Bus interface with Navigation outputs$119.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Prewired for ASWC steering wheel interface
-
Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-TYAMP2-SWC 2012 - and Up Toyota radio replacement interface with steering wheel and navigation outputs - (Amplified Audio)$123.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems
-
Axxess AX-ADBOX2 Auto Detect Radio Replacement Interface Control Box$124.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess GMOS-LAN-08 OnStar Interface for 2012 - 2016 Cadillac, Chevrolet and GMC Vehicles$129.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-AU12-SWC 2002 - 2013 Audi radio replacement interface with steering wheel and navigation outputs$129.99Out of stock- Audi complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and Bose amplified models
- Pre-wired for steering wheel control
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-FD1-SWC 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$130.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Axxess AXTC-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$139.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Axxess AX-GMLAN44-SWC 2012 - 2016 GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$139.99- Cadillac, Chevrolet, GMC complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-FD2-SWC 2011 - and Up Ford radio replacement interface with steering wheel and navigation outputs$139.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains SYNC audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for non-amplified audio systems
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog