DISCONTINUED - CE Labs CAT5TX Cat-5 to Component Video Active Balun with Audio - Transmitter
$85.99
Out of stock
SKU
CAT5TX
Expert Knowledge
Talk to a specialist
Discontinued - CE Labs CAT5TX Cat-5 to Component Video Active Balun with Audio - Transmitter
Unit includes: Receiver balun, AC adapter, and Instruction manual
CE Labs CAT5TX Cat-5 to Component Video Active Balun with Audio - Transmitter
Features
Connector Pin-out Cable A
Connector Pin-out Cable B
One Cable Connection
IR Jacks
Quick Specifications
CE Labs CAT5TX Cat-5 to Component Video Active Balun with Audio - Transmitter
Features
- Distributes HD component video with digital or left/right audio over CAT-5 or CAT-6 wire
- Requires two CAT-5 or CAT-6 cables for transmission of video and 2-channel analog audio
- System can be configured to run on a single CAT-5 cable with video transmission and digital audio
- Passive IR jacks for connection to external IR system such as Xantech
- Sends signals up to 500 ft to 2 different locations - Requires two receivers
- Loop-thru allows use of additional transmitters for more locations
- Use CAT5TX transmitter unit & CAT5TX receiver unit together to complete system
- Requires 568A Ethernet wiring
- Transmitter unit
Connector Pin-out Cable A
- Pin 1 - Video Pr (+)
- Pin 2 - Video Pr (-)
- Pin 3 - Video Pb (+)
- Pin 4 - Video Y (+)
- Pin 5 - Video Y (-)
- Pin 6 - Video Pb (-)
- Pin 7 - IR Sleeve
- Pin 8 - IR Tip
Connector Pin-out Cable B
- Pin 1 - Audio Left (+)
- Pin 2 - Audio Left (-)
- Pin 3 - Audio Right (+)
- Pin 4 - IR Ring
- Pin 5 - Ground
- Pin 6 - Audio Right (-)
- Pin 7 - Digital Audio (+)
- Pin 8 - Digital Audio (-)
One Cable Connection
- Supports component video and digital audio only
- A-Cable must be split out, by removing Brown and Brown white wire and crimping to second RJ-45 jack
IR Jacks
- Supports direct pass through, requires third party IR system that utilizes 3 wire systems with 3.5mm connections
- Passive jacks and no power is supplied, third party system must be compatible with full length cable run
Quick Specifications
- Maximum range on CAT-5 cable: 300 feet @ 1080i
- Maximum range on CAT-6 cable: 500 feet @ 1080i
- Video isolation port to port: >65dB
- Video isolation out to input: >80dB
- Return loss: >30dB
- Video bandwidth >50 MHz (HDTV requires 37MHz minimum)
- Audio input impedance: 22K ohm
- Audio output impedance: 1K ohm
- Audio Frequency response: 20Hz - 20kHz
- Audio signal to noise ratio: 80dB @ 1 volt output
| Manufacturer | CE Labs |
|---|---|
| Part Number | CAT5TX |
| Length | 300 Feet |
| Cable Type | Component Video |
| Color | Black |
| Warranty | 1 Year |
| California Proposition 65 |  Warning: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| UPC Code | 617190002112 |
| Return period | 30 days |
| Exchange period | 30 days |
Write Your Own Review
Customer Questions
We found other products you might like!
