DISCONTINUED - Crimestopper BSD-754 Front and Rear Blind Spot Sensor System with LED indicators

The Crimestopper BSD-754 is one of the first aftermarket blind spot sensor system that incorporates four sensors. When changing lanes blindspots create an incredible hazard and are a leading cause of accidents. To reduce these accidents automotive suppliers have created a radar based system that detects vehicles or other objects that are out of the drivers periphery and indicates those obstructions with an LED indicator and audible warning in the event you make a lane change. You can add this safety feature to any vehicle from your family car to commercial vehicles, and RV's.

The system provides two LED indicators that when illuminated visually indicate there is a vehicle next to you. If you begin to turn (Turn signal trigger) the system will indicate via it's speaker that there is a vehicle there and warn you to prevent a collision. Turn accident account for 840,000 accidents a year, avoid becoming a statistic by adding this safety feature to your vehicle. The system is straightforward to install and typically takes 5-6 hours to install.

Crimestopper BSD-754 Front and Rear Blind Spot Sensor System with LED indicators

Features:
• *For plastic bumpers only
• Add an OEM style blindspot protection system to any vehicle
• System has four sensors that are designed to mount on the left and right side of the rear bumper and left and right side of the front bumper, these sensors look identical to back up and parking sensors but are designed for side detection
• Includes two elegant LED indicators that can be mounted on the left and right of your dash or instrument cluster to visually indicate vehicles or other obstructions
• System can be configured to run all time or only when turn signal is used
• Paintable sensors
• Sensors have locking waterproof connectors for easy connections and years of reliable use
• Speaker for audible alarm when turn signal is activated
• Simple five wire installation
• Includes hole saw for perfect bumper drilling
• 14 foot sensor to control box extension cable
• 8 foot LED indicator extension harness
• 3 foot LED cable length
• 3 foot speaker cable length
• Includes 3M adhesive for LED's and control box

Electrical connections:
• Left turn signal
• Right turn signal
• Reverse light
• 12 volt power connection
• 12 volt ground connections

Note: These sensor systems are not compatible with metal bumpers. These are designed for plastic bumpers