Your Cart
Shop By
Filter
- Manufacturer
- Price
- -
- Number of Channels
- Warranty
- Amplifier Topology Class
- Speaker level inputs
- Amplifier Bridging
- Color
- Total Peak Power Output
- Total RMS Power Output
- Bass Knob / Remote Gain
- Minimum Impedance in Bridged Mode
- Minimum Impedance in Un-Bridged Mode
- RCA Pre-amp Audio inputs
- Preamp voltage
- RCA Pre-amp Audio outputs
- Built in Crossover
Marine amplifiers are durable weather resistant units designed to power electronic audio devices through the harshest outdoor conditions such as rain and heat.
-
Rockford Fosgate PM400X2
- 400 Watt Punch Series 2-Channel Class AB Marine Amplifier
- 125 watts RMS x 2 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink.
Your Price: $399.99 -
Rockford Fosgate PM500X2
- 500 Watt Punch Series 2-Channel Class AB Marine Amplifier
- 150 watts RMS x 2 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink.
Your Price: $449.99 -
Rockford Fosgate PM400X4
- 400 Watt Punch Series 4-Channel Class AB Marine Amplifier
- 50 watts RMS x 4 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Your Price: $399.99 -
Rockford Fosgate PM600X4
- 600 Watt Punch Series 4-Channel Class AB Marine Amplifier
- 75 watts RMS x 4 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Your Price: $499.99 -
Rockford Fosgate PM1000X5
- 1000 Watt Punch Series 5-Channel Marine Amplifier
- 75 watts RMS x 4 Channels + 150 watts RMS x 1 Channel at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Your Price: $749.99 -
Rockford Fosgate PM500X1BD
- 500 Watt Punch Series 1-Channel Class BD Marine Amplifier
- 500 watts RMS x 1 Channels at 1 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Your Price: $449.99 -
Rockford Fosgate PM1000X1BD
- 1000 Watt Punch Series 1-Channel Class BD Marine Amplifier
- 1000 watts RMS x 1 Channels at 1 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Your Price: $649.99 -
Kicker 42PXA5001
- Single-channel 500 Watt RMS amplifier
- 500 watts RMS x 1 Channels at 2 ohms
- High level input capable with an Auto Turn-On circuit
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- On-board KickEQ™ and Remote CXRC Level Control ready
Original Price: $249.95
Sale Price: $199.95
-
Kicker 42PXA2001
- Single-channel 200 Watt RMS amplifier
- 100 watts RMS x 1 Channels at 1 ohms
- High level input capable with an Auto Turn-On circuit
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- On-board KickEQ™ and Remote CXRC Level Control ready
Your Price: $149.95 -
Kicker 42PXA2002
- Two-channel 200 Watt RMS amplifier
- 25 watts RMS x 2 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- Selectable high pass: 60Hz / 80HZ / 120Hz (12dB/octave)
Your Price: $149.95 -
Kicker 42PXA3004
- Four-channel 200 Watt RMS amplifier
- 50 watts RMS x 4 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- Selectable high pass: 60Hz / 80HZ / 120Hz (24dB/octave)
Original Price: $199.95
Sale Price: $159.95
-
Kicker 40PXiBT502
- Add an audio system without a radio or headunit
- Two-channel 50 Watt RMS amplifier
- 15 watts RMS x 2 Channels at 4 ohms
- Bluetooth enabled remote control keypad controls the amplifier
- Back-lit buttons
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- 3.5mm headphone jack low level input
Your Price: $249.95 -
Kicker 42PXiBT1002
- Add an audio system without a radio or headunit
- Two-channel 200 Watt RMS amplifier
- 50 watts RMS x 2 Channels at 2 ohms
- Bluetooth enabled remote control keypad controls the amplifier
- Back-lit buttons
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- 3.5mm headphone jack low level input
Your Price: $349.95 -
Rockford Fosgate PM300X1
- 300 Watt Punch Series 1-Channel Class AB Marine Amplifier
- 200 watts RMS x 1 Channels at 4 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink.
Your Price: $299.99 -
Boss Audio BR800
- Full Range Class AB Weather-proof amplifier
- 2/1 channel output to drive stereo speakers or a subwoofer
- Includes subwoofer level controller
- Waterproof with conformal coated circuit board and UV coatings
- MOSFET regulated power supply
- 150 watts RMS x 2 channel at 4-Ohms
Your Price: $104.99
Marine amplifier considerations:
Marine amplifiers need to be more durable than those found in your car, and they need to be sealed against the elements effectively. Despite the enclosures this part of your audio system is generally encased in, there is a vital need for additional protection due to the environments these amplifiers are regularly exposed to.
Water
Because of being on the water, marine amplifiers need to be protected against the shorting out effects of that water. Your amplifiers will be encased in a covering that is rated to be waterproof, which means that they can be submerged without being damaged. This is distinct from being called "water resistant," which means that splashes will not cause damage while submersion will. Further, many marine amplifiers also have circuitry that is coated in specialized plastics or other films that keep water from shorting out the electrical connections.
Particles
Particulate matter such as dirt and sand can rapidly corrode electrical components. Because of this, marine amplifiers are generally treated with a sort of armor over the delicate components that keeps away particles. Further, this protects the components from physical damage caused by particles that are moving at high speed, since by definition boats are designed to move and can disturb sediments at high speed.
UV Radiation
UV or ultraviolet radiation is not as large a problem for marine amplifiers as it is for more exposed types of audio components, but it is still an issue. This is particularly the case because on board a boat, the level of UV is amplified by the reflected sunlight coming off of the water. This can cause components to become brittle, even breaking electrical connections. UV treatments can involve specialized coatings, thicker than average connections and more insulation than would be necessary in a less exposed area.
Shock
Boats move, often at high speeds, and are often subjected to additional movement caused by waves and heavy winds. Shocks of this nature can cause electrical components to break their loop due to losing a connection between parts. An unreliable connection can also be the cause of a fire that can be difficult to put out, or can even result in electrical shocks that can cause personal injury to people. Because of this, additional anchoring for marine amplifiers is necessary. As well, there need to be sturdier connections within the marine amplifiers than would be necessary within a land vehicle.
Your Cart
Add items to your shopping cart to calculate shipping and time in transit
Loading...