Replace Factory Radio - Bypass OEM Amplifier - 2006 - Add an Amplifier interface
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Bypassing the factory amplifier is a more difficult undertaking but provides the best sound quality gain. When bypassing, it takes a more work because you have to run the bypass harness to the factory amplifier, which is often located in some other part of the car. Bypassing the factory amplifier will require an aftermarket amplifier or using the aftermarket radio's internal amplifier.
Bypassing the factory amplifier is a more difficult undertaking but provides the best sound quality gain. When bypassing, it takes a more work because you have to run the bypass harness to the factory amplifier, which is often located in some other part of the car. Bypassing the factory amplifier will require an aftermarket amplifier or using the aftermarket radio's internal amplifier.
Shop By
- Axxess AX-DSP-HD1 AX-DSP Plug-and-Play T-Harness for 1998 - 2013 Harley Davidson vehicles - Non-Amplified$51.99Out of stock
- Fits 1998 - 2013 Harley Davidson vehicles with Non-Amplified audio systems Learn More
- Axxess AX-DSP-TY1 AX-DSP Plug-and-Play T-Harness for 2003 - and Up Toyota vehicles$53.99
- Fits 2003 - and Up Toyota vehicles with factory audio systems
- T-harness is a simple plug-n-play harness for easy installation of the AX-DSP
- Provides (4) Channel Speaker leads to utilize factory speaker wires with an aftermarket amplifier
- Provides Line-level RCA outputs from factory headunit with AX-DSP
- AX-DSP (Sold separately) provides equalization, time alignment, high and low pass crossovers
- Axxess AX-DSP-MAZ1 AX-DSP Plug-and-Play T-Harness for 2004 - 2015 Mazda vehicles$53.99Out of stock
- Fits 2004 - 2015 Mazda vehicles with factory audio systems
- T-harness is a simple plug-n-play harness for easy installation of the AX-DSP
- Provides (4) Channel Speaker leads to utilize factory speaker wires with an aftermarket amplifier
- Provides Line-level RCA outputs from factory headunit with AX-DSP
- AX-DSP (Sold separately) provides equalization, time alignment, high and low pass crossovers
- PAC AP4-TY11 2002 - 2013 Toyota and Lexus Add an Amplifier interface for JBL™ amplified sound systems$344.99
- Provides all connections to add amplifiers to factory 2012 - 2018 Toyota and Lexus Radio / Amplifier interface for vehicles with JBL sound systems
- Provides a Full-range output equalized output with volume control from stock stereo
- 3-Band parametric EQ with adjustable center and "Q"
- Remote turn on output
- Bass control knob included
- Plug and Play installation