We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Tools
Installing anything in a vehicle usually requires a special tool to remove a radio or to crimp connectors. We have all the tools you may need during your installation.
Tools enable mobile audio and video equipment to be installed easier, by securing the tiniest screws and clamps in the tight areas.
- Weller SP25NKUS Marksman Lighted Soldering Iron Kit$25.99
- High quality soldering iron with LED lights
- Power rating: 25 watts
- Generates heat up to 750°F
- Comolded, soft-grip ribbed handle for maximum comfort & reduced slippage
- Genesis GHG1500A Dual Temperature Heat Gun Kit with Four Metal Nozzle Attachments$27.99
- 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
- High and Low Temperature Settings for Versatility
- Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
- Klein Tools 32526 32 Piece Standard Bit Set$29.99
- 32 Piece Standard Bit Set
- (7) Hex bits
- (4) Phillips bits
- (7) Torx® bits
- (6) Slotted bits
- (3) adapter bits
- Gryphon TK-100 Installer Tool Kit for Mobile Video and Car Audio Applications$32.99Gryphon TK-100 Installer Tool Kit for Mobile Video and Car Audio Applications Learn More
- The Install Bay 3320 Auto Ranging AC/DC Digital Voltmeter$32.99
- 9 function digital voltmeter
- Extra large LCD display for easy viewing in awkward angles and positions
- Auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements
- Color-coded input jacks with 40 inch test leads
- Includes attachable test leads holders and stand
- Protective rubber corner guards for drop protection
- Klein Tools D209-4C 4 inch Mini Diagonal Cutters for flush cutting$35.99
- Sharp pointed nose for precise tip cutting and trimming printed circuit boards
- Spring-loaded for self-opening action
- Short jaws and beveled cutting edges permit close cutting of wire
- Klein Tools 1005 Crimping and Cutting Tool for Non-Insulated and Insulated Connectors$36.99
- Crimp your 12 volt connectors properly with a set of American made Klein crimpers and wire strippers
- Vinyl handle materials on handle for durability
- For insulated and uninsulated terminals and connectors
- Made in the USA
- GS Crimping and Cutting Tool for Non-Insulated and Insulated Connectors$39.99
- Crimp your 12 volt connectors properly with a set of American made Klein crimpers
- Soft handle materials on outer surface and hard black material on inner surface for comfort and durability
- For insulated and uninsulated terminals and connectors
- Made in the USA
- Klein Tools 59001 1/8 inch - 1/2 inch 13-Increment step drill bit$43.99
- 1/8 inch - 1/2 inch 13-Increment UniBit
- Drill multiple-size holes in thin sections of metal, plastic and wood using a single bit
- Laser-etched hole size are easy-to-read and permanent
- Anti-skid tip eliminates the need for center punching or pilot hole drilling for most sizes
- Klein Tools J1005 Journeyman crimpers for insulated and non-insulated crimp connectors$46.99
- Crimp your 12 volt connectors properly with a set of American made Klein crimpers
- Soft handle materials on outer surface and hard black material on inner surface for comfort and durability
- For insulated and uninsulated terminals and connectors
- Made in the USA
- Klein Tools 1006 Crimping and Cutting Tool$47.99Klein Tools 1006 Crimping and Cutting Tool for Non-Insulated Connectors Learn More
- Klein Tools 63050 High Leverage Cable cutters$47.99
- High-leverage design for exceptional cutting capability
- Cable-gripping shear-type jaws
- Perfect for working in confined spaces
- Made in the USA
- Klein Tools MM100 Manual Ranging AC/DC Digital Voltmeter$50.99
- 8-function 2000 count digital multimeter with audible buzzer
- Measures AC voltage up to 600 Volts
- Measures DC voltage up to 600 Volts
- DC current meter (Up to 10 amps)
- Diode and audible continuity tests
- Resistance test
- Alkaline / Nicad battery tester
- Klein Tools 59003 1/4 inch - 3/4 inch 9-Increment step drill bit$59.99
- 1/4 inch - 3/4 inch 9-Increment UniBit
- Drill multiple-size holes in thin sections of metal, plastic and wood using a single bit
- Laser-etched hole size are easy-to-read and permanent
- Anti-skid tip eliminates the need for center punching or pilot hole drilling for most sizes
- Klein Tools MM400 Auto Ranging AC/DC Digital Voltmeter$62.99
- 8-function 4-digit backlit digital multimeter with audible buzzer
- Measures AC voltage up to 600 Volts
- Measures DC voltage up to 600 Volts
- DC current meter (Up to 10 amps)
- Diode and audible continuity tests
- Resistance test
- Temperature test with thermocoupler