We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Autotek MM3020.1D Mean Machine Series 3000W Class D Monoblock Amplifier
- 3000 Watt Class D Monoblock Amplifier
- 1-ohm / 2-ohm / 4-ohm stable
- 3000W x 1 @ 1 Ω
- 1500W x 1 @ 2 Ω
- 750W x 1 @ 4 Ω
- Remote Bass Control included
Autotek MM3020.1D Mean Machine Series 3000W Class D Monoblock Amplifier
-
Features:
- 3000 Watt Class D Monoblock Amplifier
- Amplifier will operate with 1 ohm, 2 ohm or 4 ohm loads
- High energy PWM (Pulse Width Modulated) power supply
- Nickel-plated brass terminals allow for secure connection and resist erosion
- Full-range signal pass through output allows additional amplifiers to be run from the "output" RCA connections
- Power/Protect LED indicators
- 4 Gauge power wire recommended
- Remote Bass Control included
- Specifications:
- Frequency Response: 15 Hz - 150 Hz
- Signal to Noise Ratio: >95dB
- Total Harmonic Distortion: 0.05%
- Variable Low-Pass Filter: 40 Hz - 300 Hz
- Subsonic Filter: 10 Hz - 40 Hz
- Variable Bass Boost - 0 to +18 dB bass boost at 50 Hz
- Fuse: 80A x 1
-
Inputs and Outputs:
- 1 Pair RCA Low Level Inputs
- 1 Pair RCA Low Level Output
- Remote Bass Control Input
-
Max Power Output:
- Total Power Output: 2000 Watts
-
RMS Power Output:
- 3000W x 1 @ 1 Ω
- 1500W x 1 @ 2 Ω
- 750W x 1 @ 4 Ω
- Dimensions:
- Overall Dimensions: 2-1/4 inch (H) x 13-3/4 inch (L) x 9-7/8 inch (W)
Manufacturer | Autotek |
---|---|
Part Number | MM30201D |
Amplifier Topology Class | Class D |
Number of Channels | 1 Channel |
Total RMS Power at 1 ohm | 3,000.00 |
Total RMS Power at 2 ohm | 1,500.00 |
Total RMS Power at 4 ohm | 750.00 |
RMS Output per Channel (x1 at 2 ohms) | 1,500.00 Watts |
RMS Output per Channel (x1 at 1 ohms) | 3,000.00 Watts |
RMS Output per Channel (x1 at 4 ohms) | 750.00 Watts |
Total Peak Power Output | 3,000.00 (Watts) |
Amplifier Bridging | Not Bridgable |
Minimum Impedance in Bridged Mode | Not Bridgeable |
Minimum Impedance in Un-Bridged Mode | 1 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio inputs | 1 Pair |
RCA Pre-amp Audio outputs | 1 Pair |
Preamp voltage | 200 mV - 6 V |
Speaker level inputs | No |
Gain Control | Yes |
Bass Knob / Remote Gain | Yes |
Built in Crossover | Low-pass, Sub-sonic |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 4 Gauge |
Overall Height | 2.25 inches |
Overall Length | 13.75 inches |
Overall Width | 9.87 inches |
CEA2006 Compliant | No |
UPC Code | 806576228059 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.