Class D - Yes - 1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
Shop By
-
Autotek MM2020.1D Mean Machine Series 2000W Class D Monoblock Amplifier$86.99- 2000 Watt Class D Monoblock Amplifier
- 1-ohm / 2-ohm / 4-ohm stable
- 2000W x 1 @ 1 Ω
- 1000W x 1 @ 2 Ω
- 500W x 1 @ 4 Ω
- Remote Bass Control included
-
Boss Audio R2400D Riot Series Class D Monoblock Amplifier - 2400 Watts$114.99- Boss Audio R2400D Riot Series Class AB Amplifier
- Stable performance at 1 ohms
- RMS Power @ 1 ohm 1 x 1800 Watts
- Versatile amplifier
- 2 Channel RCA Inputs
- 2 Channel Pre Amp outputs
- Total Power Output of 2400Watts
-
Soundstream Picasso Nano PN1.650D Class D Monoblock Amplifier - 650 Watts$124.99- Picasso Nano 650 watts monoblock amplifier
- MOSFET PWM Power Supply
- Small and compact chassis of just 4.75”
- Remote gain control included
- High level inputs
-
Soundstream AR1.2500D Arachnid 2500 Watt 1 Channel Class D Amplifier$128.99- 2500 Watt 1 Channel Class D Amplifier
- 4-ohm / 2-ohm / 1-ohm stable
- Continuous Power Output (4 Ω): 500 Watts RMS x 1
- Continuous Power Output (2 Ω): 850 Watts RMS x 1
- Continuous Power Output (1 Ω): 1250 Watts RMS x 1
- Blue LED Illumination Accent Lighting
- Includes Bass Control Knob
-
Power Acoustik EG1-2500D 1 Channel Class D Amplifier - 2500 Watts$129.99- Power Acoustik EG1-2500D Class D Monoblock Amplifier
- Designed as a dedicated subwoofer amplifier
- 1 Ohm stable for for optimal subwoofer wiring
- 1250 Watts RMS x 1 channels @1-Ohms
- 800 Watts RMS x 1 channels @2-Ohms
- RCA level inputs
-
Hifonics BRX1116.1D Brutus Series 1100 Watts Class D Mono-Block Amplifier$152.99- BRX1116.1D Brutus BRX Series Mono-Block Class-D Amplifier with 1100 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 400 watts x 1 channel
-
Pioneer GM-D9601 2,400 Watt Class D Mono Amplifier with wired bass boost control$192.99Out of stock- 1,200W RMS @ 1 ohm
- 800W RMS @ 2 ohm
- 500W RMS @ 4 ohm
- Mono Subwoofer Amplifier
- Super compact design
- Pulse Width Modulated MOSFET Power supply
- Class D Design Offers Efficiency and High-Quality Sound
- Wired remote bass control allows you to adjust the level of bass
-
Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier$211.99- Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier
- 1000 watts RMS x 1 Channel (1 ohm)
- 600 watts RMS x 1 Channel (2 ohms)
- 400 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-10001D
-
Polk Audio PAD10001 Class D Monoblock Amplifier - 1200 watts$213.99- Class D Monoblock Amplifier
- Max power output of 1200 Watts
- Stable and High speed MOSFET Power supply
- 3 Stage Protection with Short Circuit, DC Voltage and Thermal Protection
- Nickel plated terminal allowing maximum signal transfer
-
VFL Audio VFLCOMP2K 2000 Watt Mono Class-D Competition Amplifier$269.99- 2000 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 2000 watts RMS x 1 Channel (1 ohm)
- 1000 watts RMS x 1 Channel (2 ohms)
- 500 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
-
Orion XTRPRO12501DX Class D Monoblock Amplifier - 1250W RMS$329.99- Orion XTR series Class D Monoblock Amplifier
- 500 watts @ 4 ohms
- 780 watts @ 2 ohms
- 1250 watts @ 1 ohm
- High speed MOSFET power supply
- Classic Orion industrial design
- Heavy gauge wire / high power speaker terminals
- 12 db/octave Filters
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog