Retain OEM Backup Camera - Add Backup Camera to Factory Radio - No - Back Up camera retention harness
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
Some factory radio's have a video input but the manufacturer opted to not install the camera due to vehicle package or options reasons. You can easily add a reverse camera to the factory radio with a simple harness. Add-a-camera harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory power, ground and video signal to aftermarket back up camera.
Some factory radio's have a video input but the manufacturer opted to not install the camera due to vehicle package or options reasons. You can easily add a reverse camera to the factory radio with a simple harness. Add-a-camera harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory power, ground and video signal to aftermarket back up camera.
Shop By
- Axxess AX-SUB5RVC-6V 2015 - and Up Subaru Factory Backup Camera Retention Harness$21.99
- Fits 2015 - and Up Subarua vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Single camera switching: rear camera in reverse
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera