Retain OEM Backup Camera - Replace Factory Radio - PAC - Cadillac Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- PAC OS-2X Radio Replacement Interface for 2000 - 2010 select General Motor Vehicles with or without Bose Audio$119.99
- Radio Replacement interface with for select GM Class II vehicles
- Retains OnStar and all warning chimes when factory radio is replaced
- For vehicles with or without Bose audio system
- Retains Rear Seat Entertainment system if equipped
- Provides Plug-in-connection for steering wheel control module (sold separately)
- Pac OS-2C-CTSX Onstar Interface For 2003 - 2007 Cadillac CTS and 2004 - 2005 Cadillac SRX Vehicles$159.99
- Radio Replacement interface with for 2003 - 2007 Cadillac CTS and 2004 - 2005 Cadillac SRX
- Retains OnStar and all warning chimes when factory radio is replaced
- For vehicles with or without Bose audio system
- Provides Plug-in-connection for steering wheel control module (sold separately)