Add Amplifier to Factory Radio - Replace Factory Radio - Cruze - GM Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- PAC LPHGM71 2019 - and Up select GM LocPro Advanced T-harness for vehicles with non-BOSE sound systems$64.99
- Designed for 2019 - and Up select General Motors vehicles
- Provides plug-n-play audio output connections from the factory radio without cutting factory speaker wires
- Easily add amplifier to an existing audio system and use the factory radio without cutting factory wiring
- Saves time by quickly utilizing the original speaker wires
- Plug and Play installation
- Axxess GMOS-LAN-10 Car Stereo Interface for 2016 - and Up GM Vehicles$110.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified and amplified audio systems
- Retains chimes
- Retains factory OnStar and Bluetooth
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess GMOS-045 OnStar Interface for 2011 - 2016 Chevrolet Cruze$330.99Out of stock
- For 2011 - 2016 Chevrolet Cruze vehicles
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Retains R.A.P. (retained accessory power)
- Provides NAV outputs (parking brake, reverse, mute, and speed sense)
- Retains all factory warning chimes with built in speaker