Soundstream Picasso Nano PN4.520D 4 Channel Class D Amplifier - 520 Watts
Expert Knowledge
Talk to a specialist
- Picasso Nano 530 watts Full range amplifier
- Small and compact 4.75 wide chassis
- MOSFET PWM Power Supply
- High Level Inputs
- Low Level Input Sensitivity @ 200mv-6V
When you get your first look at Sound Stream PN4.520D you will realize that size really does not matter too much at all. That is, just the size of the equipment, however the size of the sound of the stream is what really matters with the Sound Stream PN4.520D. It is so amazing and quite unbelievable that such a small piece of music amplifying equipment is capable of such an amazing output. What’s more is in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop, unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears.
This little giant tips the scales at 3.97 pounds (1.8kg) and the unbelievable dimensions of 4.75 X 9 X 1.5 inches makes it a favorite with electronics whizz kid installers who would rather go for stealth installation which will make it rather difficult for an ordinary mortal to find out just where from the sound is emanating. You can install the amplifier under the front seat or the back seat and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more is the amplifier does not get heated up after a half hour of continuous music playing at high volume. Thanks to the high pass crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. The music comes through clean and crisp, thanks to the punchy midbass that gives great harmonics from this tiny yet solid performer.
Unit includes: Car Amplifier, Mounting hardware, and Instruction manualSoundstream Picasso Nano PN4.520D 4 Channel Class D Amplifier - 520 Watts
- Features:
- Picasso Nano PN4.520D
- 520 Watts of maximum power
- Picasso Nano 520w Class D 4 channel full range Amplifier
- Small Compact 4.75? Wide Chassis
- 4-ohm Bridged/2-ohm Stereo Class D Full Range
- MOSFET PWM Power Supply
- 80Hz 12dB HP or LP Crossover
- 200mv-6V Low Level Input Sensitivity
- High Level Input
- Max Power Output:
- 100 x 4 @ 4 ohms (RMS)
- 130 x 4 @ 2 ohms (RMS)
- 260 x 2 @ 4 ohms (Bridged RMS)
- Dimensions:
- 4.75"W x 9"L x 1.5"H
- Warranty duration:
- Basic warranty: 1 year
| Manufacturer | Soundstream |
|---|---|
| Part Number | PN4.520D |
| Amplifier Topology Class | Class D |
| Number of Channels | 4 Channel |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 2 Pairs (Front, Rear) |
| Preamp voltage | 6 volts |
| Speaker level inputs | Yes |
| Gain Control | No |
| Bass Knob / Remote Gain | No |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 4 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 709483043183 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
-
Soundstream VR-1032XB Double DIN Bluetooth Stereo with 10.3 Inch Detachable Touchscreen DisplaySpecial Price $179.99 Regular Price $259.99
