We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Boss Audio PD4000 Phantom Series 4,000 Watt Class D Monoblock Amplifier
- Phantom series Class D monoblock amp
- Class D 1 Channel
- 1 Ohm stable mono operation
- Maximum power output: 4000 watts x 1 channel
- Variable low-pass filter: 50 Hz - 250 Hz
Boss Audio PD4000 Phantom Series Class D Monoblock Amp (4,000 Watts)
-
Features:
- Phantom series Class D monoblock amp
- Strapped capable with another PD4000 for a total output of 8000 watts!
- 1 Ohm stable mono operation
- Multi-LED back-lit illumination
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Pulse Width Modulated MOSFET power supply
- Gold plated low level inputs and speaker level inputs
- Variable low-pass crossover
- Variable bass boost 0dB - +18dB
- Includes remote subwoofer level control
- Signal to Noise Ration: 100 dB
- Phase control: 0° - 180°
- Frequency response: 15 Hz - 150 Hz
- Dimensions: 2.25" (H) x 10.31" (W) x 15" (D)
-
Inputs and Outputs:
- 2 - RCA audio inputs (100mV - 2V)
- 2 - Speaker level inputs (2V - 8V)
-
Max Power Output:
- 1-Ohms: 4000 watts x 1 channel
- 2-Ohms: 2000 watts x 1 channel
- 4-Ohms: 1000 watts x 1 channel
-
RMS Power Output:
- 2-Ohms: 1500 watts x 1 channel
- 4-Ohms: 750 watts x 1 channel
-
Built in Crossover:
- Variable low-pass filter: 50 Hz - 150 Hz
- Subsonic filter: 15 Hz - 40 Hz
-
Dimensions:
- Overall Dimensions: 2.25” (H) x 14” (D) x 10.31” (W)
-
Fuse rating:
- Recommended Fuse: 40A x 3
Manufacturer | Boss Audio |
---|---|
Part Number | PD4000 |
Amplifier Topology Class | Class D |
Number of Channels | 1 Channel |
Total RMS Power at 1 ohm | 3,000.00 |
Total RMS Power at 2 ohm | 1,500.00 |
Total RMS Power at 4 ohm | 750.00 |
Total Peak Power Output | 4,000.00 (Watts) |
Amplifier Bridging | Not Bridgable |
Minimum Impedance in Un-Bridged Mode | 1 ohm |
Strappable Amplifier | No |
Strappable Power Output | 8000 Watts |
RCA Pre-amp Audio inputs | 1 Pair |
RCA Pre-amp Audio outputs | 1 Pair |
Preamp voltage | 2 volts |
Speaker level inputs | Yes |
Gain Control | Yes |
Bass Knob / Remote Gain | Yes |
Built in Crossover | Low-pass |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 0 Gauge |
CEA2006 Compliant | No |
UPC Code | 791489101226 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.