We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Neutral Leather - 1 Pair - Neutral Leather - 1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
Shop By
-
Autotek MM2020.1D Mean Machine Series 2000W Class D Monoblock Amplifier$86.99- 2000 Watt Class D Monoblock Amplifier
- 1-ohm / 2-ohm / 4-ohm stable
- 2000W x 1 @ 1 Ω
- 1000W x 1 @ 2 Ω
- 500W x 1 @ 4 Ω
- Remote Bass Control included
-
Autotek MM1525.1D 1,500 Watt Class D Mono Amplifier with wired bass boost control$89.99- 1,500 Watt RMS 1-Channel Class D Car Amplifier
- Class D Design Offers Efficiency and High-Quality Sound
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 150 W x 1
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 750 W x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 375 W x 1
-
Autotek MM1125.1D 1,100 Watt Class D Mono Amplifier with wired bass boost control$89.99- 1,100 Watt RMS 1-Channel Class D Car Amplifier
- Class D Design Offers Efficiency and High-Quality Sound
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 1100 W x 1
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 550 W x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 225 W x 1
-
Hifonics BRX1116.1D Brutus Series 1100 Watts Class D Mono-Block Amplifier$152.99- BRX1116.1D Brutus BRX Series Mono-Block Class-D Amplifier with 1100 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 400 watts x 1 channel
-
Soundstream PN1.1000D Picasso Nano 1000 Watt 1 Channel Class D Amplifier$167.99- 1000 Watt 1 Channel Class D Amplifier
- 4-ohm / 2-ohm / 1-ohm stable
- Continuous Power Output (4 Ω): 350 Watts RMS x 1
- Continuous Power Output (2 Ω): 600 Watts RMS x 1
- Continuous Power Output (1 Ω): 1000 Watts RMS x 1
- Includes Bass Control Knob
-
VFL Audio VFLCOMP1K 1000 Watt Mono Class-D Competition AmplifierSpecial Price $179.99 Regular Price $229.99- 1000 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 1000 watts RMS x 1 Channel (1 ohm)
- 500 watts RMS x 1 Channel (2 ohms)
- 250 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
-
Hifonics BRX1516.1D Brutus Series 1500 Watts Class D Mono-Block Amplifier$190.99- BRX1516.1D Brutus BRX Series Mono-Block Class-D Amplifier with 1500 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 550 watts x 1 channel
-
Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier$211.99- Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier
- 1000 watts RMS x 1 Channel (1 ohm)
- 600 watts RMS x 1 Channel (2 ohms)
- 400 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-10001D
-
Polk Audio PAD10001 Class D Monoblock Amplifier - 1200 watts$213.99- Class D Monoblock Amplifier
- Max power output of 1200 Watts
- Stable and High speed MOSFET Power supply
- 3 Stage Protection with Short Circuit, DC Voltage and Thermal Protection
- Nickel plated terminal allowing maximum signal transfer
-
Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier$223.99- Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier
- 1500 watts RMS x 1 Channel (1 ohm)
- 950 watts RMS x 1 Channel (2 ohms)
- 600 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-15001D
-
Hifonics BRX2016.1D Brutus Series 2000 Watts Class D Mono-Block Amplifier$228.99- BRX2016.1D Brutus BRX Series Mono-Block Class-D Amplifier with 2000 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass EQ boosts from 0 to +10dB at 20 Hz - 80 Hz with variable width
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 1/0 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 700 watts x 1 channel
-
Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier$249.99- Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier
- 1800 watts RMS x 1 Channel (1 ohm)
- 1150 watts RMS x 1 Channel (2 ohms)
- 750 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-18001D
-
Orion XTRPRO12501DX Class D Monoblock Amplifier - 1250W RMS$329.99- Orion XTR series Class D Monoblock Amplifier
- 500 watts @ 4 ohms
- 780 watts @ 2 ohms
- 1250 watts @ 1 ohm
- High speed MOSFET power supply
- Classic Orion industrial design
- Heavy gauge wire / high power speaker terminals
- 12 db/octave Filters
-
Rockford Fosgate R1200X1D 1200 Watt Single Channel Class D Car Amplifier$379.99Out of stock- 1200 Watt Prime Series Monoblock Class D Car Amplifier
- 1200 watts RMS x 1 Channels at 1 ohms
- 800 watts RMS x 1 Channels at 2 ohms
- High level input capable with an Muted Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
-
Rockford Fosgate P1000X1bd 1000 Watt Mono Channel Class BD Car Amplifier$427.99Out of stock- 1,000 Watt Punch Series Monoblock Class AB Car Amplifier
- 300 watts RMS x 1 Channels at 4 ohms
- 1000 watts RMS x 1 Channels at 1 ohms
- High level input capable with an Auto Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- DSM, NOMAD, MESHA3 and C.L.E.A.N. technologies
- Hidden top mounted control panel and a cast aluminum heatsink
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog