Replace Factory Radio - Retain OEM Amplifier - Explorer - Ford Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining the factory amplifier is the easiest option when replacing a factory radio. In some vehicles retaining the factory amplifier is the only option. But your new stereo's sound is limited to what the factory amplifier's out capabilities are.
Retaining the factory amplifier is the easiest option when replacing a factory radio. In some vehicles retaining the factory amplifier is the only option. But your new stereo's sound is limited to what the factory amplifier's out capabilities are.
Shop By
- Metra 70-5517 Car Stereo Wiring Harness for 1998 - 2005 Ford / Lincoln / Mercury with Premium Sound Systems$20.99
- For 1998 - 2005 Ford / Lincoln / Mercury with Sound Systems Ford vehicles
- Used to install an aftermarket car stereo without cutting stock connections
- Designed for vehicles with premium audio systems and factory amplifier
- Uses high level speaker outputs for speaker connections
- idataLink Maestro HRN-RR-F02 Radio Replacement and Steering Wheel Interface Harness for 2011 - 2018 Ford Vehicles$36.99
- Fits select 2011 - 2018 Ford Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- idataLink Maestro HRN-RR-F01 Radio Replacement and Steering Wheel Interface Harness for 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles$59.99
- Fits select 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-FD2-SWC 2011 - and Up Ford radio replacement interface with steering wheel and navigation outputs$139.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains SYNC audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for non-amplified audio systems