Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- idataLink Maestro ACC-USB-TO2 USB Retention harness for 2012 - 2018 Scion, Subaru, and Toyota vehicles$24.99
- Retain your factory USB jack panel and capabilities when you install an after-market radio
- Compatible with select 2012 - 2018 Scion, Subaru, and Toyota vehicles
- Plug & Play Harness and requires no modification to factory wiring
- Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99
- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- idataLink Maestro HRN-RR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$64.99
- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99
- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
- Metra GMOS-09 2000 - 2004 GM OnStar Class II Data Bus Interface for Amplified Audio Systems$123.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in Non-Amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Fits select Oldsmobile and Pontiac vehicles with amplified audio systems
- Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
- Metra CHTO-02 2004 - 2007 Chrysler/Dodge amplified data interface$129.99
- Interface for Dodge and Chrysler vehicles with factory amplifiers and data-bus systems
- Provides output signals from factory bus system
- Provides constant 12 volt output
- Provides accessory 12 volt output
- Retains retained accessory power while doors remain closed
- Prewired for Metra ASWC steering wheel interface
- Provides 4 - speaker connections
- Provides parking brake, reverse, mute, V.S.S. connections Learn More
- Axxess AX-HYKIA2-SWC 2012 - 2016 Hyundai Veloster radio replacement interface with steering wheel and navigation outputs$129.99
- Hyundai Veloster complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- idataLink ADS-MRR Maestro RR Radio Replacement Interface with Steering Wheel Controls$139.99
- Radio Replacement Interface with Steering wheel Control and Factory Amp Integration
- Allows for integration of factory steering wheel controls and factory amplifier with an aftermarket stereo
- Retains OnStar, SYNC and uConnect in select vehicles
- Before installing you must program the adapter at the iDatalink site to work with your particular vehicle
- Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99
- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
- Axxess AX-HYKIA4-SWC 2010 - 2013 Hyundai / Kia radio replacement interface with steering wheel and navigation outputs$201.99
- 2010 - 2013 Hyundai / Kia complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Retains the factory AUX-IN jack
- Retains the factory backup camera