Add Backup Camera to Factory Radio - Replace Factory Radio - Axxess - Toyota Wiring Harness
Some factory radio's have a video input but the manufacturer opted to not install the camera due to vehicle package or options reasons. You can easily add a reverse camera to the factory radio with a simple harness. Add-a-camera harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory power, ground and video signal to aftermarket back up camera.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- Axxess AX-TOYCAM1-6V Toyota Factory backup camera retention / addition harness$39.99
- Fits 2012 - 2015 select Scion and Toyota vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Allows an aftermarket camera to be added to the factory screen
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
- Axxess AX-TOYCAM2-6V Toyota Factory backup camera retention / addition harness$39.99
- Fits 2007 - 2013 select Scion and Toyota vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Allows an aftermarket camera to be added to the factory screen
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
- Axxess AX-TOYCAM3-6V Toyota Factory backup camera retention / addition harness$42.99Out of stock
- Fits 2013 - 2016 select Toyota vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Allows an aftermarket camera to be added to the factory screen
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Axxess AX-TYAMP1-SWC 2003 - and Up Toyota radio replacement interface with steering wheel and navigation outputs$118.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Built in steering wheel interface controller
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified audio systems
- Axxess AX-TYAMP2-SWC 2012 - and Up Toyota radio replacement interface with steering wheel and navigation outputs - (Amplified Audio)$123.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems
- Axxess AX-TYAMP3-SWC 2018 - and Up Toyota radio replacement interface with steering wheel and navigation outputs$172.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems