Soundstream RN5.2000D Rubicon Nano Series 2,000 Watt Class-D 5-Channel Amplifier
Expert Knowledge
Talk to a specialist
- Rubicon Nano Series Class-D 4-Channel Amplifier
- 4 ohms: 75 x 4 channels + 300 x 1(sub)
- 2 ohms: 100 x 4 channels + 500 x 1(sub)
- Bridged, 4 ohms: 200 x 2 channels + 500 x 1 (2Ω)
- Aluminum heat sink for better cooling
- MOSFET Power Supply with Audiophile Grade IRTM Transistors
- Military Grade SMT PCB Maintains Dynamic Performance
- 2-ohm and 4-ohm Operation
Soundstream RN5.2000D Rubicon Nano Series 2,000 Watt Class-D 5-Channel Amplifier
- Features:
- Rubicon Nano Series Class-D 5-Channel Full-Range Amplifier
- High Efficiency Class D Full Range Amplifiers
- Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- 2-ohm Stereo and 4-ohm Bridged Full Range Operation
- MOSFET Power Supply with Audiophile Grade IRTM Transistors
- Military Grade SMT PCB Maintains Dynamic Performance
- Direct Short, Thermal and Overload Circuits Protect Amplifier
- Quick Disconnect High Level Wire Harness Included
- Easy DIY Install Single Sided Terminals & Controls
- 4-AWG Power Input Terminals & 12g Speaker Output Terminals
- (3) 30-amp fuses
-
Tone controls:
- Variable bass boost: 0 dB - 18 dB (45 Hz)
- Variable Low-pass electronic crossover (50-500 Hz, 12 dB/octave) / (x10) 500Hz-5KHz
- Variable High-pass electronic crossover (50-500 Hz, 12 dB/octave) / (x10) 500Hz-5KHz
- Variable Subsonic Filter: 20Hz - 50Hz
-
Inputs and Outputs:
- 4-channel nickel plated RCA inputs
- 4-channel speaker level input connector with auto turn on
- 2-channel nickel plated RCA inputs for subwoofer
- 2-channel speaker level input connector with auto turn on
- Input Sensitivity Low level: 200mV-6.5V
-
Max Power Output:
- Total Power Output: 1,200 Watts
-
RMS Power Output:
- 4 ohms: 75 x 4 channels + 300 x 1(4Ωsub)
- 2 ohms: 100 x 4 channels + 500 x 1(2Ω sub)
- Bridged, 4 Ω: 200 x 2 channels + 500 x 1 (2Ω)
-
Dimensions:
- Overall Dimensions: 2-3/4" (H) x 12" (L) x8-1/4" (W)
| Manufacturer | Soundstream |
|---|---|
| Part Number | RN5.2000D |
| Amplifier Topology Class | Class D |
| Number of Channels | 5 Channel |
| Total RMS Power at 2 ohm | 900.00 |
| Total RMS Power at 4 ohm | 600.00 |
| RMS Output per Channel (x1 at 2 ohms) | 500.00 Watts |
| RMS Output per Channel (x1 at 4 ohms) | 300.00 Watts |
| RMS Output per Channel (x4 at 4 ohms) | 75.00 Watts |
| RMS Output per Channel (x4 at 2 ohms) | 100.00 Watts |
| Total Peak Power Output | 2,000.00 (Watts) |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 3 Pairs (Front, Rear, Subwoofer) |
| RCA Pre-amp Audio outputs | None |
| Preamp voltage | 200 mV - 6 V |
| Gain Control | Yes |
| Bass Knob / Remote Gain | Yes |
| Built in Crossover | High-pass, Low-pass, Sub-sonic |
| Cooling Fan | No |
| Color | Blue |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 4 Gauge |
| Overall Height | 2.75 inches |
| Overall Length | 12.00 inches |
| Overall Width | 8.25 inches |
| CEA2006 Compliant | No |
| UPC Code | 709483050761 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
