Rockford Fosgate P3S-1X12 Single P3 12" Shallow Loaded Subwoofer Enclosure

The Unit Includes: Single 12 inch subwoofer loaded enclosure

Rockford Fosgate P3S-1X12 Single P3 12" Subwoofer Low profile Loaded Enclosure

Stage 3 - Ultimate power!

The P3 series subwoofers are the king of the hill. The Rockford Fosgate P3 low profile pre-loaded subwoofers enclosures offer the largest power handling capability of all, up to 800 watts! The P3S-1X12 is a single 12 inch subwoofer pre-installed in a low-profile enclosure that was developed using Rockford Fosgate's computer aided design software. The 5/8 inch MDF enclosure is optimized and provides the deepest bass extension and has the most output. The Rockford Fosgate P3S-1X12 subwoofers utilize the VAST technology, this technology increases cone area by 25% giving you even more volume when compared to an equivalent size woofer. The P3S-1X12 challenges everything you know about subwoofers, these subwoofers must be heard to be believed.

The P3S-1X12 takes the bass to the highest level. The single 10 inch subwoofer enclosure creates bass that has to be heard to be believed, this subwoofer blows everything else out of the water! Now you can buy a low profile pre-built subwoofer system that is guaranteed to leave you awestruck and all you have to do is connect the speaker wires. Rockford Fosgate has done the work for you with the P3S-1X12 subwoofer system. The P3 subwoofers are top of the line woofers from Rockford Fosgate and utilize all of the latest subwoofer technology.

• Single 12" P3D2-10 subwoofer in MDF enclosure
• Dual two ohm coils wired internally to 1 ohm impedance
• Anodized aluminum cone and dustcap
• M-Roll Santoprene™ surround
• High temperature 4-layer 2-1/2" voice coil with spun laced nomex insulating reinforcement collar
• StampCast basket with integrated spider venting
• VAST Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
• Shallow motor assembly
• Anodized Aluminum voice-coil former for excellent heat dissapation
• Fatigue resistant and reduced strain stitched tinsel leads
• Diamond cut cast aluminum trim ring with optional grille
• Custom insulated compression input terminal assembly
• Proprietary spider venting/cooling technique
• Custom 10-AWG nickel plated push terminals
• Double stacked ferrite magnet structure
• Frequency response: 34-250 Hz
• Sensitivity: 85 dB

Vented Enclosure features:
• Constructed with 5/8" MDF
• Sealed enclosure for excellent tight sound with shallow roll-off
• High current binding posts
• Covered in High Density Carpet
• Wired with Rockford speaker cabling

Power Handling Max:
• Maximum Power: 800 Watts

Power Handling RMS:
• 400 Watts nominal continuous power handling RMS

Quick Specs:
• Nominal Impedance: 1 –Ohm

Wedge Dimensions:
• 13-1/2" (H) x 27-3/8" (W) 5-3/8" (D1) x 3-3/8" (D2)