Soundstream T5.2500DL Tarantula Electro 2500 Watt 5 Channel Class D Amplifier
Expert Knowledge
Talk to a specialist
- 2500 Watt 5 Channel Class D Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- Continuous Power Output (4 Ω): 75 Watts RMS x 4 and 325 Watts RMS x 1
- Continuous Power Output (2 Ω): 125 Watts RMS x 4 and 500 Watts RMS x 1
Soundstream T5.2500DL Tarantula Electro 2500 Watt 5 Channel Class D Amplifier
-
Features:
- Soundstream T5.2500DL 2500 Watt 5 Channel Class D Amplifier
- Multi-color RGB LED Illumination Accent Lighting
- Solid Color, Flashing, Random, or Slow-Motion Color Change
- Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
- Military Grade SMT PCB Maintains Dynamic Performance
- LED power (Blue) and protect (red) indicators
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Nickel-plated screw terminals
- 5-channel operation
- 0-gauge power and ground leads and a 100-amp fuse recommended
- Frequency Response: 10Hz to 20,000 Hz
- Signal to noise ratio: >94dB
- Total Harmonic Distortion (THD): <0.05% (1 kHz)
- Pre-Amp features:
- Variable Bass Boost (0 - 12 dB Channel 5 only)
- Variable High-pass electronic crossover (50 - 4,000 Hz Channels 1 - 2)
- Variable Low-pass electronic crossover (250 - 4,000 Hz Channels 3 - 4)
- Variable High-pass electronic crossover (50 - 150 Hz Channels 3 - 4)
- Variable Low-pass electronic crossover (30 - 150 Hz Channel 5 only)
- Crossover slopes: 12 dB/octave
-
Inputs and Outputs:
- Five-channel operation (6-Channel input)
- Nickel-plated RCA level inputs and outputs
- Input Sensitivity Low level: 200mV - 6.0 Volts
-
Max Power Output:
- Total Power Output: 2,500 Watts
-
RMS Power Output:
- Continuous Power Output (2 Ω, ≤ 1% THD+N): 125 W x 4 and 500 x 1
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 75 W x 4 and 325 x 1
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 750 W x 1 (Subwoofer channel only)
-
RMS Power Bridged Output:
- Continuous Power Output (4 Ω, ≤ 1% THD+N): 250 W x 2
-
Built in Crossover:
- Variable High-pass electronic crossover (50 - 4,000 Hz Channels 1 - 2)
- Variable Low-pass electronic crossover (250 - 4,000 Hz Channels 3 - 4)
- Variable High-pass electronic crossover (50 - 150 Hz Channels 3 - 4)
- Variable Low-pass electronic crossover (30 - 150 Hz Channel 5 only)
-
Dimensions:
- Overall Dimensions: 2-1/2" (H) x 17-1/4" (L) x 9" (W)
| Manufacturer | Soundstream |
|---|---|
| Part Number | T5.2500DL |
| Amplifier Topology Class | Class D |
| Number of Channels | 5 Channel |
| Total RMS Power at 1 ohm | 750.00 |
| Total RMS Power at 2 ohm | 1,000.00 |
| Total RMS Power at 4 ohm | 625.00 |
| RMS Output per Channel (x1 at 4 ohms) | 75.00 Watts |
| RMS Output per Channel (x2 at 4 ohms) | 75.00 Watts |
| RMS Output per Channel (x4 at 4 ohms) | 75.00 Watts |
| Total Peak Power Output | 2,500.00 (Watts) |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 1 ohm |
| Strappable Amplifier | No |
| Strappable Power Output | No |
| RCA Pre-amp Audio inputs | 3 Pairs (Front, Rear, Subwoofer) |
| RCA Pre-amp Audio outputs | None |
| Preamp voltage | 200 mV - 6 V |
| Speaker level inputs | No |
| Gain Control | Yes |
| Bass Knob / Remote Gain | No |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 0 Gauge |
| Overall Height | 2.50 inches |
| Overall Length | 17.25 inches |
| Overall Width | 9.00 inches |
| CEA2006 Compliant | No |
| UPC Code | 7.09483E+11 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
