Unit includes: AX-ADBOX1 Interface control box, 16 pin wire harness with stripped leads, and Instruction manual
Axxess AX-ADBOX1 Auto Detect Radio Replacement Interface Control Box
The AX-ADBOX1 interface is designed to allow you to install an aftermarket radio and have it interface with the OEM LAN-Bus or CAN-Bus. The AX-ADBOX1 is designed to auto detect what type of vehicle it is installed and will automatically configure itself for operation. Simply add one of the plug-and-play harnesses that plugs into your vehicles factory radio connectors. The interface retains full functionality of the OEM systems as well as all safety and warning chimes.
The AX-ADBOX1 also retains the R.A.P or retained accessory power convenience feature, allowing you to use the radio after the vehicle is turned off as long as you don't open the doors. This interface has the capability of using the steering wheel controls on your new radio and easily up-datable with a USB connection. The AX-ADBOX1 now has the required outputs for the installation of a navigation radio.
Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
Auto detect interface for easy configuration
Provides accessory (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Used In Amplified Non-Amplified Or Digital Amplified Systems
Retains chimes in GM vehicles
Retains turn signal clicks in GM vehicles
Retains factory auxiliary input
Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
We show you how to properly wire subwoofers. There are many options with dual and single voice coil subwoofers and they all present different loads to your amplifier. We show you the do's and don'ts!
Learn the basics of an aftermarket car stereo installation. First we walk you through a step by step process of the wiring harness installation, then we show you how to mount the units using a dash kit.
It very easy to confuse your self and order the wrong Metra Wiring harness. For most vehicle's, Metra manufacturers two harnesses, one to replace a damaged OEM harness and the other to facilitate the installation of an aftermarket car stereo system. We show you the differences so you can choose the one you need.