Audiopipe APCLE-30001D 3000 Watt Class D Mono Amplifier
Expert Knowledge
Talk to a specialist
- Audiopipe APCLE-30001D 3000 Watt Class D Mono Amplifier
- 3000 watts RMS x 1 Channel (2 ohm)
- 1800 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Features:
- 1800 Watts Max Power
- Pulse Width Modulated MOSFET Power supply
- Double side FR-4 PCB with high quality SMD components
- Oversized toroids for excellent current and voltage control
- 3-Way Protection circuit senses internal temperature and automatically lowers input level to prevent heat damage. Short circuit protection prevent damage when speaker leads are shorted. Overload protection prevent damage from low impedance or blown woofers.
- 2-ohm stable
- Variable Low Pass filters allow you to adjust the playback frequencies from 40Hz to 180Hz at 12dB per octave
- 2 channel RCA inputs accepts up to 5 volt input signals
- 0° and 180° phase control
- Variable Bass boost controls: 0 - +12dB at 30Hz - 80Hz
- Variable subsonic filter: 24dB 5Hz - 50Hz
- Gold plated terminals for all connections
- Accepts up to 16 volts DC input for maximum sound output
- Frequency Response: 8Hz to 180 Hz
- Total Harmonic Distortion (4 Ω): < 0.15% (1kHz)
- Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz): >70dB
- Dimensions: 27-7/8" (W) x 2-1/8" (H) x 7" (D)
- Minimum 0 Gauge power wire with 200 amp fuse
-
RMS Power Rating:
- 4 ohms: 1800 watts x 1 channels
- 2 ohms: 3000 watts x 1 channels
| Manufacturer | Audiopipe |
|---|---|
| Part Number | APCLE30001D |
| Amplifier Topology Class | Class D |
| Number of Channels | 1 Channel |
| Total RMS Power at 1 ohm | 0.00 |
| Total RMS Power at 2 ohm | 3,000.00 |
| Total RMS Power at 4 ohm | 1,800.00 |
| Total Peak Power Output | 3,000.00 (Watts) |
| Amplifier Bridging | Not Bridgable |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 1 Pair |
| RCA Pre-amp Audio outputs | 1 Pair |
| Preamp voltage | 5 volts |
| Speaker level inputs | No |
| Gain Control | Yes |
| Bass Knob / Remote Gain | Yes |
| Built in Crossover | Low-pass, Sub-sonic |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 0 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 784644417447 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
