Audiopipe APDLO-3001D 3000 Watt Class D Mono Amplifier
Expert Knowledge
Talk to a specialist
- 3000W RMS Monoblock Class-D Amplifier
- 1 ohms: 3000W x 1 channels
- 2 ohms: 2178W x 1 channels
- 4 ohms: 1444W x 1 channels
- One Pair of Low level RCA inputs
- Features:
- 3000W RMS Monoblock Class-D Amplifier
- Pulse Width Modulated MOSFET Power supply
- Double side FR-4 PCB with high quality SMD components
- Oversized toroids for excellent current and voltage control
- 3-Way Protection: Thermal, Short Circuit, and Overload
- 1-ohm, 2-ohm and 4-ohm stable
- Variable Low Pass filters allow you to adjust the playback frequencies from 40Hz to 180Hz at 12dB per octave
- One Pair of Low level RCA inputs
- RCA inputs accepts up to 5 volt input signals
- Variable Bass boost controls: 0 - +12dB at 30Hz - 80Hz
- Input Level: 0.2V - 6V
- Gold plated terminals for all connections
- Accepts up to 16 volts DC input for maximum sound output
- Input Level: 0.2V - 6V
- Frequency Response: 10Hz - 180Hz
- Subsonic Filter: 10Hz - 50Hz
- Total Harmonic Distortion: <1%
- Signal-to-Noise Ratio: >80dB
- Dimensions: 27-7/8" (W) x 2-1/8" (H) x 7" (D)
- Minimum 0 Gauge power wire with 200 amp fuse
-
RMS Power Rating:
- 1 ohms: 3000 watts x 1 channels
- 2 ohms: 2178 watts x 1 channels
- 4 ohms: 1444 watts x 1 channels
| Manufacturer | Audiopipe |
|---|---|
| Part Number | APDLO-3001D |
| Amplifier Topology Class | Class D |
| Number of Channels | 1 Channel |
| Total RMS Power at 1 ohm | 3,000.00 |
| Total RMS Power at 2 ohm | 2,178.00 |
| Total RMS Power at 4 ohm | 1,444.00 |
| Strappable Amplifier | No |
| Strappable Power Output | 6000W |
| RCA Pre-amp Audio inputs | 1 Pair |
| Speaker level inputs | No |
| Gain Control | Yes |
| Bass Knob / Remote Gain | Yes |
| Built in Crossover | Low-pass, Sub-sonic |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 0 Gauge |
| Overall Height | 2.20 inches |
| Overall Length | 27.90 inches |
| Overall Width | 7.00 inches |
| CEA2006 Compliant | No |
| UPC Code | 784644418246 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
