We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Power Acoustik BAMF4-1200 4-Channel Class-A/B Car Amplifier
- BAMF Series Class AB 4-Channel amplifier
- 4 / 3 / 2 Channel modes of operation
- Full range operation so amplifier can be used for high or subwoofers
- Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors
- Variable low-pass crossover
- Variable high-pass crossover
- 1200 watts maximum output
-
Features:
- BAMF Series Class AB 4-Channel amplifier
- Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors for excellent sound quality
- Full range operation so amplifier can be used for high or subwoofers
- 4 / 3 / 2 Channel modes of operation
- Die-Cast Aluminum Alloy Heatsink for Optimum Heat Dissipation and custom look
- 2 Ohm stable in stereo mode and 4 ohm stable in mono-bridged mode
- 3-way protection circuitry (Thermal, Overload, and Speaker short protection)
- Multi-color LED (green) for power and (red) for protect
- Nickel plated low level inputs and speaker level inputs
- Variable low-pass crossover (Channels 1/2 and Channels 3/4)
- Variable high-pass crossover (Channels 1/2 and Channels 3/4)
- Variable bass boost 0dB - +12dB (Channels 1/2 and Channels 3/4)
- Signal to noise ratio: 103 dB
-
Inputs and Outputs:
- 4 - RCA audio inputs (250mV - 5V)
-
Max Power Output:
- 1200 watts total
-
RMS Power Output:
- 2-Ohms: 150 Watts x 4 channels
- 4-Ohms: 75 Watts x 4 channels
- 4-Ohms Bridged: 300 Watts x 2 channels
-
Built in Crossover:
- Frequency Response: 9 Hz - 50,000 Hz
- Variable high-pass crossover: 50 Hz - 500 Hz 12 dB/octave (Channels 1/2)
- Variable high-pass crossover: 50 Hz - 500 Hz 12 dB/octave (Channels 3/4)
- Variable low-pass crossover: 50 Hz - 500 Hz 12 dB/octave (Channels 1/2)
- Variable low-pass crossover: 50 Hz - 500 Hz 12 dB/octave (Channels 3/4)
-
Dimensions:
- Overall Dimensions: 2-1/4” (H) x 8-1/2” (D) x 11-1/4” (W)
-
Fuse rating:
- Recommended Fuse: 30A x 2
Manufacturer | Power Acoustik |
---|---|
Part Number | BAMF4-1200 |
Amplifier Topology Class | Class AB |
Number of Channels | 4 Channel |
Amplifier Bridging | Bridgable @ 4 ohms |
Minimum Impedance in Bridged Mode | 4 ohm |
Minimum Impedance in Un-Bridged Mode | 2 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio outputs | 2 Pairs (Front, Rear/Sub) |
Preamp voltage | 5 volts |
Speaker level inputs | No |
Gain Control | Yes |
Bass Knob / Remote Gain | No |
Built in Crossover | High-pass, Low-pass, None |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 4 Gauge |
CEA2006 Compliant | No |
UPC Code | 709483052697 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.