Line Output Conveters
Line output converters make adding an amplifier to a factory radio much easier. You can convert any speaker level signal to a low level for amplification with a line output converter.
Line output converters are amplified devices with the capability to transform electronic signals to an existing system.
-
PAC LP5-4 L.O.C. PRO Series 4-Channel Line Output Converter$34.99Out of stock- 4-Channel High Power Line Output Converter
- High power input up 55 watts per channel
- Configurable for differential inputs for using a new radio with existing amplifiers
- Single dial, precision matched stereo, level gain adjustment
- Compact size
- Easy to install
-
PAC LP7-4 L.O.C. PRO Series 4-Channel Line Output Converter with remote turn on circuit$39.99Out of stock- 4-Channel High Power Line Output Converter
- Built in remote turn-on circuit
- High power input up 55 watts per channel
- Configurable for differential inputs for using a new radio with existing amplifiers
- Single dial, precision matched stereo, level gain adjustment
- Compact size
- Easy to install
-
PAC AA-GM44 Add-An-Amp Interface For Select 2010 and Up GM Vehicles with 44-Pin Harness$40.99Out of stock- Makes adding an amplifier to GM vehicles very easy
- The AA-GM44 “T-harness” plugs into the vehicle’s wiring behind the factory radio
- Provides a 4-channel adjustable audio output via two sets of stereo RCA connectors
- This allows simple and quick audio connection to an aftermarket amplifier without effecting the performance of the stock speakers
-
PAC LP7-2R L.O.C. PRO Series 2-Channel Line Output Converter with remote turn on circuit and Remote volume control$42.99- 2-Channel High Power Line Output Converter
- Built in remote turn-on circuit
- High power input up 55 watts per channel
- Remote volume control that can be used as a remote bass volume control
- Configurable for differential inputs for using a new radio with existing amplifiers
- Single dial, precision matched stereo, level gain adjustment
- Compact size
- Easy to install
-
Axxess AX-LDBK Universal Line Driver and Line Output Converter for Vehicles$44.99- Handle high level input and comes with a dB gain of -17.5dB to +20 dB
- Overall gain can be adjusted, using on-board potentiometer or by installing an external potentiometer
- Small and compact in size
- Delivers maximum 6 volt RMS output
-
PAC AOEM-GM21C Amplifier Interface Kit in Select 1998-2002 GM/Chevrolet Vehicles$45.99- Fits 2001 and Up select General Motors vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
-
PAC AOEM-HON17 2006 and Up Honda add an amplifier interface$49.99- Fits 2006 and Up select Honda vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
-
Axxess LOC-FDH2 Plug-and-Play Line Output Converter Harness for 2011 - 2020 Ford vehicles$49.99- Fits 2011 - 2020 Ford vehicles with factory audio systems
- Designed to work with Axxess LOCs, and is versatile enough to be compatible with most sound processors, line output converters, and amplifiers with high-level inputs
- Provides (4) Channel Speaker level outputs
- T-harness provides convenient access to the speaker-level output signals from your factory radio
- It provides signal connections for your system, including constant 12-volt (10-amp fuse), ground, and remote turn-on leads
-
PAC AOEM-CHR2 2002 and Up Chrysler add an amplifier interface$50.99- Fits 2002 and up select Chrysler vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
-
PAC AOEM-CHR3 2007 and Up Chrysler / Dodge / Jeep add an amplifier interface$50.99- Fits 2007 and Up select Chrysler / Dodge / Jeep vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
-
Rockford Fosgate RF-HLC4 4-Channel High-to-Low Converter$51.99Out of stock- Rockford Fosgate RFHLC4 high to low converter
- Supports 4 Channel
- Speaker level inputs
-
PAC AOEM-MAZ2 2006 and Up Mazda add an amplifier interface$52.99- Fits 2006 and Up select Mazda vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
-
PAC LPHTY02 2019 - and Up select Toyota LocPro Advanced T-harness for vehicles with non-amplified sound systems$56.99- Designed for 2019 - and Up select Toyota vehicles
- Provides plug-n-play audio output connections from the factory radio without cutting factory speaker wires
- Easily add amplifier to an existing audio system and use the factory radio without cutting factory wiring
- Saves time by quickly utilizing the original speaker wires
- Plug and Play installation
-
PAC LPHCH41 2013 - and Up select Dodge / Chrysler / Jeep / RAM LocPro Advanced T-harness for vehicles with non-amplified sound systems$56.99- Designed for 2013 - and Up select Dodge / Chrysler / Jeep / RAM vehicles
- Provides plug-n-play audio output connections from the factory radio without cutting factory speaker wires
- Easily add amplifier to an existing audio system and use the factory radio without cutting factory wiring
- Saves time by quickly utilizing the original speaker wires
- Plug and Play installation
-
PAC AOEM-GM1416 2006 and Up Select General Motors add an amplifier interface$57.99- Fits 2006 and up select General Motors vehicles
- Interface is designed to be used with factory radios and converts radio outputs to aftermarket amplifier audio connections
- Provides front and rear low level outputs
- Provides full range audio output 20-20,000Hz
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog