We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
-
Boss Audio R2400D Riot Series Class D Monoblock Amplifier - 2400 Watts$114.99- Boss Audio R2400D Riot Series Class AB Amplifier
- Stable performance at 1 ohms
- RMS Power @ 1 ohm 1 x 1800 Watts
- Versatile amplifier
- 2 Channel RCA Inputs
- 2 Channel Pre Amp outputs
- Total Power Output of 2400Watts
-
Soundstream AR1.2500D Arachnid 2500 Watt 1 Channel Class D Amplifier$128.99- 2500 Watt 1 Channel Class D Amplifier
- 4-ohm / 2-ohm / 1-ohm stable
- Continuous Power Output (4 Ω): 500 Watts RMS x 1
- Continuous Power Output (2 Ω): 850 Watts RMS x 1
- Continuous Power Output (1 Ω): 1250 Watts RMS x 1
- Blue LED Illumination Accent Lighting
- Includes Bass Control Knob
-
Power Acoustik EG1-2500D 1 Channel Class D Amplifier - 2500 Watts$129.99- Power Acoustik EG1-2500D Class D Monoblock Amplifier
- Designed as a dedicated subwoofer amplifier
- 1 Ohm stable for for optimal subwoofer wiring
- 1250 Watts RMS x 1 channels @1-Ohms
- 800 Watts RMS x 1 channels @2-Ohms
- RCA level inputs
-
Precision Power SPL30001 SPL Audio Monoblock Amplifier - 1500W RMS$149.99- Class-D Monoblock Amplifier
- Designed as a dedicated full range audio amplifier
- Stable 1 ohm, 2 ohm and 4 ohm loads
- 1500W RMS @ 1 ohm
- 1000W RMS @ 2 ohm
- 700W RMS @ 4 ohm
-
Power Acoustik BAMF1-3000D 1-Channel Class-D 3000 Watt Car Amplifier$159.99- BAMF Series Class D 1-Channel mono-block amplifier
- Strap-able allows you to bridge 2 of amps together
- Limited frequency response dedicated high-power subwoofer amplifier
- Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors
- Variable low-pass crossover
- 1 Ohm stable for maximum subwoofer output
- 3000 watts maximum output
- 1500 Watts x 1 channel @ 1-Ohm
-
Soundstream PN1.1000D Picasso Nano 1000 Watt 1 Channel Class D Amplifier$167.99- 1000 Watt 1 Channel Class D Amplifier
- 4-ohm / 2-ohm / 1-ohm stable
- Continuous Power Output (4 Ω): 350 Watts RMS x 1
- Continuous Power Output (2 Ω): 600 Watts RMS x 1
- Continuous Power Output (1 Ω): 1000 Watts RMS x 1
- Includes Bass Control Knob
-
Hifonics BG-1300.1D BRUTUS Gamma Monoblock Amplifier - 1300 Watts$181.99- Class-D Monoblock Amplifier
- Designed as a dedicated full range audio amplifier
- Stable in 1 ohm, 2 ohm and 4 ohm loads
- 4 ohms: 325 watts x 1 channel
- 2 ohms: 650 watts x 1 channel
- 1 ohms: 1300 watts x 1 channel
-
Soundstream BXA1-5000D Bass Xtreme 5,000 Watt Monoblock Class D Amplifier$189.99Out of stock- Bass Xtreme 5,000W Class D Monoblock Amplifier
- 1-Ohm: 1650W RMS
- 2-Ohms: 1100W RMS
- 4-Ohms: 700W RMS
- Digital Bass Reconstruction Processor Built-in
- 27Hz-63Hz Variable Center/Sweep Frequency
- Variable Q/Width to Broaden or Narrow the Bandwidth
-
Hifonics BRX1516.1D Brutus Series 1500 Watts Class D Mono-Block Amplifier$190.99- BRX1516.1D Brutus BRX Series Mono-Block Class-D Amplifier with 1500 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass boosts from 0 to +10dB at 45 Hz
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 4 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 550 watts x 1 channel
-
Pioneer GM-D9601 2,400 Watt Class D Mono Amplifier with wired bass boost control$192.99Out of stock- 1,200W RMS @ 1 ohm
- 800W RMS @ 2 ohm
- 500W RMS @ 4 ohm
- Mono Subwoofer Amplifier
- Super compact design
- Pulse Width Modulated MOSFET Power supply
- Class D Design Offers Efficiency and High-Quality Sound
- Wired remote bass control allows you to adjust the level of bass
-
Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier$211.99- Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier
- 1000 watts RMS x 1 Channel (1 ohm)
- 600 watts RMS x 1 Channel (2 ohms)
- 400 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-10001D
-
Polk Audio PAD10001 Class D Monoblock Amplifier - 1200 watts$213.99- Class D Monoblock Amplifier
- Max power output of 1200 Watts
- Stable and High speed MOSFET Power supply
- 3 Stage Protection with Short Circuit, DC Voltage and Thermal Protection
- Nickel plated terminal allowing maximum signal transfer
-
Soundstream RN1.3000D Rubicon Nano Series 3,000 Watt Class-D Monoblock Amplifier$219.99- Rubicon Nano Series Class-D Monoblock Amplifier
- 1 ohms: 1500 watts
- 2 ohms: 600 watts
- 4 ohms: 300 watts
- Aluminum heat sink for better cooling
- MOSFET Power Supply with Audiophile Grade IRTM Transistors
- Military Grade SMT PCB Maintains Dynamic Performance
- 2-ohm and 4-ohm Operation
- 1-ohm Minimum Impedance Monoblock Operation
-
Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier$223.99- Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier
- 1500 watts RMS x 1 Channel (1 ohm)
- 950 watts RMS x 1 Channel (2 ohms)
- 600 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-15001D
-
Hifonics BRX2016.1D Brutus Series 2000 Watts Class D Mono-Block Amplifier$228.99- BRX2016.1D Brutus BRX Series Mono-Block Class-D Amplifier with 2000 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass EQ boosts from 0 to +10dB at 20 Hz - 80 Hz with variable width
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 1/0 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 700 watts x 1 channel
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog