Retain OEM USB Input - Replace Factory Radio - GMC - GM Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- Axxess AX-USB-MINIB USB Adapter Harness for 2010 - and Up GM, Chrysler, Dodge, and Jeep Vehicles$9.99
- Allows the user to retain the OE USB port and integrate it with an aftermarket radio
- 12 inches long
- Perfect for use with aftermarket radio with rear USB input
- Pac USB-GM1 OEM USB Port Retention Cable for Select GM(R) & Chrysler(R) Vehicles$9.99
- Pac USB-GM1 OEM USB Port Retention Cable for Select GM(R) & Chrysler(R) Vehicles
- Travel Adapters & USB Hubs
- Metra 70-1859 Car Stereo Wiring Harness for 1999 - 2002 GM Vehicle with factory amplifier$12.99
- Plus into factory car harness for select 1999 - 2002 GM vehicles with factory amplifier
- Includes 21 Pin power and speaker plug with factory tight connections
- Makes replacing the factory car stereo very easy without cutting wires
- No modification to existing vehicle wiring
- Metra 70-2104 Car Stereo Wiring Harness for 2006 - and Up General Motors vehicles$19.99
- For 2006 - and Up General Motors vehicles
- Used to install an aftermarket car stereo without cutting stock connections
- Designed for vehicles without premium audio systems and factory amplifier
- Will not retain OnStar or warning chimes
- idataLink Maestro HRN-HRR-GM3 Radio Replacement and Steering Wheel Interface Harness for 2014 - 2018 Chevrolet and GMC Vehicles$99.99
- Fits select 2014 - 2018 Chevrolet and GMC Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Axxess GMOS-LAN-10 Car Stereo Interface for 2016 - and Up GM Vehicles$110.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified and amplified audio systems
- Retains chimes
- Retains factory OnStar and Bluetooth
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- PAC OS-2X Radio Replacement Interface for 2000 - 2010 select General Motor Vehicles with or without Bose Audio$119.99
- Radio Replacement interface with for select GM Class II vehicles
- Retains OnStar and all warning chimes when factory radio is replaced
- For vehicles with or without Bose audio system
- Retains Rear Seat Entertainment system if equipped
- Provides Plug-in-connection for steering wheel control module (sold separately)
- Axxess GMOS-LAN-08 OnStar Interface for 2012 - 2016 Cadillac, Chevrolet and GMC Vehicles$129.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess GMOS-LAN-09 OnStar Interface for 2014 - and Up GM Vehicles$159.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess GMOS-LAN-07 OnStar Interface for 2007 - 2016 Cadillac, Chevrolet and GMC Vehicles$159.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess AX-ADGM100 2000 - and Up GM RSE / Onstar / Bose Radio Replacement Interface$220.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Covers Class ll, LAN 29 and LAN 11 vehicles
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified or non amplified systems
- Retains chimes
- Retains OnStar/OE Bluetooth
- Retains factory Back-up camera and RSE (rear seat entertainment)
- Axxess GMOS-MOST-01 MOST-Bus Interface for 2014 - and Up GM Vehicles$299.99Out of stock
- Easily remove the factory stereo and replace it with an aftermarket stereo and retain all of the factory functions
- Retains R.A.P. (retained accessory power)
- Retains OnStar system
- Retains OEM Bluetooth system
- Used in M.O.S.T. amplified audio systems
- Retains factory back up camera
- Retains chimes
- Retains factory 3.5mm auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)