We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
-
Metra XSVI-5520-NAV Car Stereo Interface harness and control box for 2006 - and Up Ford with Navigation$65.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony/ THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Includes a prewired ASWC-1 connector
-
Metra XSVI-2105-NAV 2006 - and Up GM LAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - and Up LAN-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface
-
Metra XSVI-2104-NAV 2006 - 2012 General Motors GM-LAN Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - 2012 GM-LAN Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
-
Metra XSVI-2003-NAV 2005 - and Up GM Class-2 Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2005 - and Up Class-2 Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Pre-wired for ASWC steering wheel interface control
-
Metra XSVI-9003-NAV 2002 - and Up Volkswagen CAN-Bus interface with Navigation outputs$66.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2002 - and Up Volkswagen CAN-Bus vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface will not work with Fender Audio systems
- Interface will work with Monsoon and Dynaudio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface Learn More
-
DISCONTINUED - Metra AFDI-RSE-01 Ford / Lincoln / Mercury Can-Bus Rear seat entertainment system Interface$67.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 207 - and Up Ford vehicles with factory rear seat entertainment systems
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface willl allow factory overhead DVD system to work with an aftermarket radio
- Provides rear seat audio output so that you can connect to Aux input on an aftermarket car stereo via RCA cables or 3.5mm jack
-
Metra XSVI-9006-NAV 2015 - and Up Volkswagen Golf / Jetta / Passat Radio interface with Navigation outputs$68.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2015 - and Up Volkswagen vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
-
Metra LC-CHRC-01 Radio Replacement Data Bus interface with Chime Retention Speaker for 2013 and Up Dodge Ram pickup trucks$69.99Out of stock- Designed for 2013 and Up Dodge Ram pickup trucks
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains the 3.5mm AUX-IN jack
- Retains all factory warning chimes with built in speaker
-
Axxess AX-GMCL2 2000 - 2013 GM Radio Replacement Interface with navigation outputs$69.99- Fits 2000 - 2013 model years
- Complete General Motors radio replacement interface
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
-
Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
-
Metra USB-CAB Firmware Update Cable for Axxess interfaces$71.99- Easily update the firmware of all Axxess interfaces with the USB-CAB USB cable
- Continous updates are made available by Metra, with this cable it is very easy to update your interface
- Ensure continuous compatibility with your vehicle
-
Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
-
Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
-
PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier$74.99PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier Learn More
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog