2014 - Yes, requires external module - Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock
- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Metra XSVI-6515-NAV 2012 - 2015 Fiat 500 Radio interface with Navigation outputs$62.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2012 - 2015 Fiat 500 vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with both amplified and non-amplified audio systems
- Metra LC-CHRC-01 Radio Replacement Data Bus interface with Chime Retention Speaker for 2013 and Up Dodge Ram pickup trucks$69.99
- Designed for 2013 and Up Dodge Ram pickup trucks
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains the 3.5mm AUX-IN jack
- Retains all factory warning chimes with built in speaker
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99
- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only