Replace Factory Radio - 2014 - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- idataLink Maestro HRN-RR-SU1 Radio Replacement and Steering Wheel Interface Harness for 2008 - 2015 Subaru Vehicles$36.99
- Fits select 2008 - 2015 Subaru Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock
- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Metra XSVI-6515-NAV 2012 - 2015 Fiat 500 Radio interface with Navigation outputs$62.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2012 - 2015 Fiat 500 vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with both amplified and non-amplified audio systems
- Metra LC-CHRC-01 Radio Replacement Data Bus interface with Chime Retention Speaker for 2013 and Up Dodge Ram pickup trucks$69.99
- Designed for 2013 and Up Dodge Ram pickup trucks
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains the 3.5mm AUX-IN jack
- Retains all factory warning chimes with built in speaker
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99
- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
- Metra MZTO-01 Bose Amplifier wiring harness and interface for 2007 - and Up Mazda Cx-7 and Cx-9$94.99
- Complete car stereo integration harness for Bose Amplified audio systems or when removing factor amplifier
- Provides RAP (Retained Accessory Power)
- Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
- Prewired ASWC-1 harness included (ASWC-1 sold separately)
- High level speaker inputs for connections to factory amplifier