We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Power Acoustik EG4-1000 4 Channel Class AB Amplifier - 1000 Watts
$99.99
In stock
Only 4 left
SKU
EG41000
Expert Knowledge
Talk to a specialist
- Power Acoustik EG4-1000 Class AB 4-Channel Amplifier
- Designed as a dedicated full range audio amplifier
- 2 Ohm stable in stereo and 4 ohm stable in mono
- 125 Watts RMS x 4 channels @4-Ohms
- 65 Watts RMS x 4 channels @4-Ohms
- 4-RCA level inputs
The EG4-1000 is an elegantly designed amplifier with 1,000 watts of maximum power output. It provides 4-channel stereo output with possible impedances of 2-ohms and 4-ohms and can be dual bridged for 2-channel operation with an impedance of 4 ohms. The MOSFET Power Supply houses a robustly constructed PCB with PWM. The internal circuitry is protected from direct shortages, thermal hazards and overload of power. If you have a factory stereo system, you can further enhance its audio levels with the High/Speaker level that accepts the speaker signal and Low level RCA inputs which accepts signal from the pre-amp outputs of the source unit.
4 Gauge Power wiring and 8 Gauge speaker wire outputs enables a higher and stable flow of current. Enjoy the pure audio quality with variable 12dB High and Low Pass crossovers.
Unit includes: Car Amplifier, Mounting hardware, and Instruction manual- Features:
- Power Acoustik EG4-1000 Class AB 4-Channel Edge Series Amplifier
- Designed as a dedicated full range audio amplifier for door speakers or bridged for subwoofers
- Robust MOSFET Power Supply with Military grade PCB with PWM
- 2 ohms stable in stereo and 4 ohm stable in mono for high power output
- 3-way protection circuitry (Thermal, Overload, and Speaker short protection)
- High Speaker Level and Low Level RCA Input
- Variable input gain control with low level input voltage up to 6 Volts
- Nickel plated low level RCA inputs
- Nickel plated low level RCA outputs
- Variable low-pass crossover: 50 - 400Hz, 12 dB/octave
- Variable high-pass crossover: 50 - 400Hz, 12 dB/octave
- Variable bass boost: 0dB / +6dB / +12dB
- Gain Control
- Color: Satin Silver Chassis
- Inputs and Outputs:
- 4 - Nickel-plated RCA low level inputs (250 mV - 6 V)
- 2 - Nickel-plated RCA level outputs
- Input sensitivity is 250 mV to 6V
- 8 AWG to 18 AWG speaker connections
- 4 AWG to 8 AWG power connections
- Max Power Output:
- 4-Ohms Dual Bridged: 500 watts x 2 channel
- 2-Ohms Stereo: 250 watts x 4 channel
- 4-Ohms Stereo: 130 watts x 4 channel
- RMS Power Output:
- 4-Ohms Dual Bridged: 250 watts x 2 channel
- 2-Ohms Stereo: 125 watts x 4 channel
- 4-Ohms Stereo: 65 watts x 4 channel
- Built in Crossover:
- Variable low-pass crossover: 50 - 400Hz, 12 dB/octave
- Variable low-pass crossover: 50 - 400Hz, 12 dB/octave
- All Pass
- Dimensions:
- Overall Dimensions: 2.25” (H) x 9” (D) x 10.25” (W)
- Current consumption:
- Recommended Fuse: 70 amp
| Manufacturer | Power Acoustik |
|---|---|
| Part Number | EG4-1000 |
| Amplifier Topology Class | Class AB |
| Number of Channels | 4 Channel |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio outputs | 2 Pairs (Front, Rear) |
| Preamp voltage | 6 volts |
| Speaker level inputs | Yes |
| Gain Control | Yes |
| Bass Knob / Remote Gain | No |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Silver |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 4 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 709483052772 |
| Return period | 30 days |
| Exchange period | 30 days |
Write Your Own Review
Customer Questions
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
Related Products
Check items to add to the cart or
We found other products you might like!
More from Power Acoustik
