We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Audiopipe APMN-4100D Class AB 100 Watts x 4-Channel Mini Amplifier
- Class A/ B 4-Channel Compact Amplifier
- 4-ohm / 2-ohm stable
- Bridged operation
- 100 watts x 4 channels @ 4 Ω
- 130 watts x 4 channels @ 2 Ω
- 250 watts x 2 channels bridged @ 4 Ω
- Includes Bass Control Knob
Audiopipe APMN-4100D Class AB 4-Channel Mini Amplifier
-
Features:
- Class D 4-Channel Compact Amplifier
- Amplifier will operate with 4-ohm or 2-ohm loads
- 2 / 3 /4 channel operation
- Bridged operation
- CEA-2006 Compliant Amplifier
- Remote gain control included
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- Soft start turn-on
- Fuse - 30A x 2
- Pre-Amp features:
- Frequency Response - 10Hz - 20kHz
- Signal to Noise Ratio >80dB
- Gain Adjust - 200mV - 6V
- Speaker Level Gain Adjust - 4V - 12V
- Total Harmonic Distortion - 1.0%
- Variable Low-pass Crossover Frequency - 50Hz - 200Hz
- Variable Low-pass Crossover Slope - (dB/oct): 24dB/octave
- Variable High-pass Crossover Frequency - 50Hz - 1500Hz
- Variable Bass Boost @ 40Hz (0 - 15 dB)
-
Inputs and Outputs:
- 4-channel, 3-channel, 2-channel operation
- 2 Pairs of RCA low level inputs
- Remote Bass Control Input
-
RMS Power Output:
- 100 watts x 4 channels @ 4 Ω
- 130 watts x 4 channels @ 2 Ω
- 250 watts x 2 channels bridged @ 4 Ω
- Dimensions:
- Overall Dimensions: Dimensions: 6-3/8"W x 2-1/4"H x 8-3/8"
Manufacturer | Audiopipe |
---|---|
Part Number | APMN-4100D |
Amplifier Topology Class | Class D |
Number of Channels | 4 Channel |
Total RMS Power at 1 ohm | 0.00 |
Total RMS Power at 2 ohm | 460.00 |
Total RMS Power at 4 ohm | 400.00 |
RMS Output per Channel (x1 at 4 ohms) | 0.00 Watts |
RMS Output per Channel (x2 at 4 ohms) | 250.00 Watts |
RMS Output per Channel (x4 at 4 ohms) | 100.00 Watts |
Total Peak Power Output | 500.00 (Watts) |
Amplifier Bridging | Bridgable @ 4 ohms |
Minimum Impedance in Bridged Mode | 4 ohm |
Minimum Impedance in Un-Bridged Mode | 2 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio inputs | 2 Pairs (Front, Rear) |
RCA Pre-amp Audio outputs | None |
Preamp voltage | 200 mV - 6 V |
Speaker level inputs | Yes |
Gain Control | Yes |
Bass Knob / Remote Gain | Yes |
Built in Crossover | High-pass, Low-pass |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 4 Gauge |
Overall Height | 2.13 inches |
Overall Length | 8.38 inches |
Overall Width | 6.38 inches |
CEA2006 Compliant | No |
UPC Code | 784644417973 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.