Retain Factory Steering Wheel Controls - Replace Factory Radio - Radio Replacement - Axxess
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
-
Axxess AX-GMCL2 2000 - 2013 GM Radio Replacement Interface with navigation outputs$49.99- Fits 2000 - 2013 model years
- Complete General Motors radio replacement interface
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
-
Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
-
Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
-
Axxess AX-GMLAN112 2006 - 2012 GM radio replacement LAN-BUS interface with navigation outputs$60.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-MB1 2001 - and Up Mercedes Benz radio replacement interface with navigation outputs$64.99Out of stock- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
-
Axxess AX-CH013 2004 - and Up Chrysler radio replacement CAN-BUS interface with navigation outputs$77.99- Chrysler, Jeep, Mitsubishi, and Volkswagen complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess GMOS-LAN-10 Car Stereo Interface for 2016 - and Up GM Vehicles$110.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified and amplified audio systems
- Retains chimes
- Retains factory OnStar and Bluetooth
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess GMOS-LAN-08 OnStar Interface for 2012 - 2016 Cadillac, Chevrolet and GMC Vehicles$129.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AXTC-VW2 2015 - and Up Volkswagen radio replacement interface with steering wheel, navigation outputs and factory back up camera$156.99- Provides 12 volt 10 amp output, navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Perfect for use with car stereos featuring non-amplified systems or when replacing amplified systems
- Auto detects vehicle type, radio connection, and preset controls
- Retains factory back up camera
-
Axxess GMOS-LAN-07 OnStar Interface for 2007 - 2016 Cadillac, Chevrolet and GMC Vehicles$159.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-ADGM100 2000 - and Up GM RSE / Onstar / Bose Radio Replacement Interface$220.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Covers Class ll, LAN 29 and LAN 11 vehicles
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified or non amplified systems
- Retains chimes
- Retains OnStar/OE Bluetooth
- Retains factory Back-up camera and RSE (rear seat entertainment)
-
Axxess GMOS-MOST-02 2014 - and Up Chevrolet radio replacement MOST-BUS interface with steering wheel and navigation outputs$299.99Out of stock- 2014 - and Up Chevrolet Corvette and Impala radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified MOST-BUS audio systems
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog