We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
2016 - Axxess
Shop By
-
Axxess AXBUCH-MB1 Backup Camera Retention for 2014 - 2016 Mercedes Benz vehicles$8.99- Fits 2014 - 2016 Mercedes Benz vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Allows an aftermarket camera to be added to the factory screen
- Plug-and-play installation for quick installation
-
Axxess AX-FDSYNC-SWC Ford Transit Steering wheel control and backup camera retention harness$11.99- Fits 2015 - and Up Ford Transit vehicles with factory 4.2 inch monitor monitor
- Retains factory steering wheel controls (Requires ASWC-1 controller)
- Retains the factory backup camera
- Allows an aftermarket car stereo with a video input to be used with a factory backup camera
- Plug and Play installation for quick reversible installation
-
Axxess BACKUPCAM-2 Cadillac, Chevrolet, GMC Factory backup camera retention harness$11.99- Fits 2012 - and Up select Cadillac, Chevrolet, GMC vehicles
- Use your factory back up camera with an aftermarket car stereo
- Plug-and-play installation for quick installation
- Provides 12 volt dc output for factory camera
-
Axxess BACKUPCAM-3 Chevrolet, GMC Factory backup camera retention harness$12.99- Fits 2014 - and Up select Chevrolet and GMC vehicles
- Use your factory back up camera with an aftermarket car stereo
- Plug-and-play installation for quick installation
- Provides 12 volt dc output for factory camera
-
Axxess AX-ADXSVI-CH3 Interface Wiring Harness for 2013 - and Up Chrysler and Fiat Vehicles$16.99- AX-ADXSVI Interface Wiring Harness for 2013 - and Up Chrysler and Fiat Vehicles
- Facilitates the installation of the AX-ADXSVI interface box
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Retains 3.5mm AUX jack
- Ideal for car stereos without any amplified system or when one is replacing the installed amplified system
- Includes a prewired ASWC-1 connector
- 12 volt 10 amp car accessory
- Allows the user to connect a USB device
-
Axxess AX-ADMZ01 Interface Harness for 2007 - and Up Mazda Vehicles$17.99- Allows the user to install the AX-ADBOX1 or AX-ADBOX2 interface box
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Includes a prewired ASWC-1 connector
- 12 volt 10 amp car accessory output
-
Axxess AXBUCH-LX6V Backup Camera Retention/Add-On Lexus 2014-Up$27.99- Fits 2014 - up select Lexus vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Allows an aftermarket camera to be added to the factory screen
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
-
Axxess AX-SUB5RVC-6V 2015 - and Up Subaru Factory Backup Camera Retention Harness$29.99- Fits 2015 - and Up Subarua vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Single camera switching: rear camera in reverse
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
-
DISCONTINUED - Axxess AX-ADDCAM-CH3 2011 - 2018 Chrysler, Dodge CAN-BUS interface harness$37.99Out of stock- Fits select Axxess AX-ADDCAM-CH3 2011 - 2018 Chrysler, Dodge CAN-BUS interface harness vehicles with factory screen
- Add (3) additional cameras to a factory back up camera system (Retains factory camera if equipped)
- Add (4) cameras to a factory radio if vehicle doesn't have a factory back up camera
- Automatically switches to proper camera via triggers
- Uses T-harness to interrupt that factory navigation signal
- Plug and Play installation for reversible installation
-
Axxess AXBUCS-SB286V 2015 - and Up Subaru Steering Wheel Control and Factory Backup Camera Harness$39.99- Fits 2015 - and Up Subaru vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Single camera switching: rear camera in reverse
- Retains factory steering wheel controls with aftermarket car stereo (Requires ASWC-1)
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
-
Axxess AX-NIS40SWC-6V Nissan Steering Wheel Control and Factory Backup Camera Harness$39.99- Fits 2016 - 2018 Nissan Maxima vehicles
- Use your Aftermarket Car Stereo to display the factory back up camera
- Single camera switching: rear camera in reverse
- Retains factory steering wheel controls with aftermarket car stereo (Requires ASWC-1)
- Plug-and-play installation for quick installation
- Provides 6 volt dc output for factory camera
-
Axxess AX-ADDCAM-MAZ2 2014 - and Up Mazda3 CAN-BUS interface harness$42.99- Fits select AX-ADDCAM-MAZ2 2014 - and Up Mazda3 vehicles with factory screen
- Add (3) additional cameras to a factory back up camera system (Retains factory camera if equipped)
- Add (4) cameras to a factory radio if vehicle doesn't have a factory back up camera
- Automatically switches to proper camera via triggers
- Uses T-harness to interrupt that factory navigation signal
- Plug and Play installation for reversible installation
-
Axxess AXAC-FDSTK Multi Camera Interface Turn Signal Harness for 2014 - and Up Ford vehicles with 4.2 inch screen$42.99- Use your factory Ford 4.2 inch to display a Multiple cameras with auto turn signal activation
- “Plug & Play” supplemental harness for the AXAC-FD1 harness and AXAC-1 interface (both sold separately)
- Plug and Play turn signal harness
-
Axxess AX-ADFD02 Harness for 2011 - and Up Ford Vehicles$45.99- Facilitates the installation of the AX-ADBOX1 or ADBOX2 interface box in select Ford vehicles
- Easy plug-and-play installation to an aftermarket car stereo
- Provides navigation outputs like reverse, parking brake, VSS
- Includes a pre-wired ASWC-1 steering wheel interface connector
- Color coded wires for easy installation
-
Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog