Discontinued - Safesight TOP-SS-B403Q Quad processor and Switcher with 4 Camera Inputs and Wired remote

Convert any monitor including your existing navigation monitor into a quad screen monitor with triggered video inputs. The Safesight TOP-SS-B403Q Quad screen processor is one of the most versatile processors on the market today. The TOP-SS-B403Q has camera inputs for four cameras, as part of the harness for each camera it provides power for each camera making the installation as easy as running a cable. The Safesight processor has a wired remote control that comes in a standard switch knock out so that you can add it to any vehicle in an empty switch location! The TOP-SS-B403Q has triggered inputs for the rear and side cameras, so anytime you turn with a signal it will trigger the monitor to select that camera in the direction you are turning. The system will auto select the reverse camera when the vehicle is placed in reverse preventing a deadly reversing accident. The Safesight TOP-SS-B403Q is the best quad processor available

• Converts any single input monitor or factory navigation screen to a quad screen with 360 view
• 3 - Triggered video inputs for automatic viewing modes (Left, Right, and Rear camera triggers)
• Compact control box makes it easy to add to any vehicle
• 4 camera inputs for front, rear, left side, and right side cameras
• Camera cables have power connectors making very easy to connect cameras to a single power source
• 5.5mm x 2.5 mm power connectors for each camera - the most commonly used camera connectors
• 4 direct camera button wired remote control with factory switch location knock out making it look like it came with the vehicle
• Separate power button that can be used in the event that the wired remote control is not needed
• Operates from 9 ~ 15V
• Supports a maximum of 4 x 400 mA camera power output

• Manual single camera view: Camera can be selected manually with wired remote control for the Front, Left side, Right side, and Rear camera
• Automatic single camera view: Camera view is triggered automatically for the Rear, Left side, and Right side camera (Requires trigger connection)
• Manual Quad screen view: All 4 camera views are triggered with the power button, view is split into 4 equal segments (Requires a press of the power button)
• Automatic triple screen side view: Side camera view is triggered automatically for the Left side, or the Right side camera and the triggered camera occupies 1/2 of the screen on the appropriate side and rear and opposite side appear as quarter screen views (Requires trigger connection)
• Automatic triple screen rear view: Rear camera view is triggered automatically for the for the reverse camera, the camera view occupies 1/2 of the screen on the bottom of the screen and left and right side appear as quarter screen views on the upper portion (Requires trigger connection)

• 4 - RCA camera inputs
• 4 - 5.5mm x 2.5mm DC power connectors for cameras
• 1 - Soft touch power button
• 1 - 4 camera key wired remote control in factory button knockout for OEM look
• 1 - RCA video output
• 1 - Left camera trigger (Yellow wire)
• 1 - Rear camera trigger (Brown wire)
• 1 - Right camera trigger (Blue wire)
• 1 - 12 volt power input (Red wire)
• 1 - Ground connection (Black wire)

• Normally off state, require a press of the power button to turn on unless triggered by a reverse or turn signal
• Manual power on displays all four cameras, if a trigger is presented after manual turn on the triggered image will appear, however once trigger is removed unit will power down after 5 seconds
• Camera can be selected manually and unit will turn on if a keypad button is pressed

• Operating Temperature: -20 Celsius - +70 Celsius
• Storage Temperature: -30 Celsius - +80 Celsius
• Power for cameras: max 4 x 400 mA 12V

Video input
• Video inputs: 4 video inputs for cameras:
• Peak value: 1Vp-p
• Impedance: 4.7K ohm

Video output
• Video inputs: 1 video output for monitor:
• Peak value: 1Vp-p
• Impedance: 75 ohm

• Rear view cameras
• Front view cameras
• Side view cameras

Monitor shown in pictures is not included it is for visual reference only. This item is for the control box only.