QMV 12VTILTR1 12 VDC SPDT Tilt sensor Controlled Latching relay

The QMV 12VTILT11 is a very cool relay. Have you ever wanted to have something turn on or off after your have reached a certain orientation? The 12VTILT1 relay is just the relay for you. This relay is a latching relay with adjustable tilt control allows you to control any device and set the sensitivity threshold of the rolling ball sensor. This relay is perfect for a variety of things such as fan turn on or off when your amp rack opens. It utilizes mini relay with single pole dual throw contacts. It easily switches 10 amps of current and peaks of 15 amps.

Features:
• Fully latching relay with on board sensitivity threshold of the rolling ball sensor and indicator LED's
• Circuit board design with dual indicator LED's
• Attached rolling ball sensor (Can be de-soldered and extended)
• High-sensitivity SW-520D angle sensor
• Requires a minimum of 9 volts to function
• Can be used as a turn on or turn off depending on the single pole dual throw design
• Latches when temperature threshold is reached
• Latch releases until temperature is below threshold
• 10 amp / 15 amp rated contacts
• SPDT - Single pole Dual throw
• Power consumption (idle) @ 12Vdc 07 mA
• Power consumption (latched) @ 12Vdc 45 mA
• Screw terminals for easy connections up to 16 gauge wire
• Dimensions 1" (W) x 2-5/8" (L) x 3/4" (H) with terminals

Contact configuration:
• DC (-) - Ground all-time, grounds the circuit on the relay
• DC (+) - 12 volt positive, powers the circuit on the relay
• COM - Common latching relay connection (Can be positive or negative depending on your need)
• NO - Normally open contact (Connects to common when relay latches)
• NC - Normally closed contact (Connects to common when relay is un-energized or at rest)