We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
No - 1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
Shop By
-
Polk Audio PAD10001 Class D Monoblock Amplifier - 1200 watts$213.99- Class D Monoblock Amplifier
- Max power output of 1200 Watts
- Stable and High speed MOSFET Power supply
- 3 Stage Protection with Short Circuit, DC Voltage and Thermal Protection
- Nickel plated terminal allowing maximum signal transfer
-
Soundstream BXA1-7500D Bass Xtreme 7,500 Watt Monoblock Class D Amplifier$222.99Out of stock- Bass Xtreme 7,500W Class D Monoblock Amplifier
- 1-Ohm: 2500W RMS
- 2-Ohms: 1500W RMS
- 4-Ohms: 1000W RMS
- Digital Bass Reconstruction Processor Built-in
- 27Hz-63Hz Variable Center/Sweep Frequency
- Variable Q/Width to Broaden or Narrow the Bandwidth
-
Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier$223.99- Audiopipe APCLE-15001D 1500 Watt Class D Mono Amplifier
- 1500 watts RMS x 1 Channel (1 ohm)
- 950 watts RMS x 1 Channel (2 ohms)
- 600 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-15001D
-
Hifonics BRX2016.1D Brutus Series 2000 Watts Class D Mono-Block Amplifier$228.99- BRX2016.1D Brutus BRX Series Mono-Block Class-D Amplifier with 2000 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass EQ boosts from 0 to +10dB at 20 Hz - 80 Hz with variable width
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 1/0 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 700 watts x 1 channel
-
Soundstream T1.4000DL Tarantula Electro 4000 Watt 1 Channel Class D Amplifier$234.99- 4000 Watt 1 Channel Class D Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- Continuous Power Output (4 Ω): 700 Watts RMS x 1
- Continuous Power Output (2 Ω): 1300 Watts RMS x 1
- Continuous Power Output (1 Ω): 2000 Watts RMS x 1
- Includes Bass Control Knob
-
Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier$249.99- Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier
- 1800 watts RMS x 1 Channel (1 ohm)
- 1150 watts RMS x 1 Channel (2 ohms)
- 750 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-18001D
-
VFL Audio VFLCOMP2K 2000 Watt Mono Class-D Competition Amplifier$269.99- 2000 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 2000 watts RMS x 1 Channel (1 ohm)
- 1000 watts RMS x 1 Channel (2 ohms)
- 500 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
-
Orion XTRPRO12501DX Class D Monoblock Amplifier - 1250W RMS$329.99- Orion XTR series Class D Monoblock Amplifier
- 500 watts @ 4 ohms
- 780 watts @ 2 ohms
- 1250 watts @ 1 ohm
- High speed MOSFET power supply
- Classic Orion industrial design
- Heavy gauge wire / high power speaker terminals
- 12 db/octave Filters
-
VFL Audio VFLCOMP2.5K 2500 Watt Mono Class-D Competition Amplifier$377.99- 2500 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 2500 watts RMS x 1 Channel (1 ohm)
- 1250 watts RMS x 1 Channel (2 ohms)
- 750 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
-
Soundstream T1.6000DL Tarantula Electro 6000 Watt 1 Channel Class D Amplifier$395.99- 6000 Watt 1 Channel Class D Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- Continuous Power Output (4 Ω): 800 Watts RMS x 1
- Continuous Power Output (2 Ω): 1400 Watts RMS x 1
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 2500 W x 1
- Continuous Power Output (0.5 Ω, ≤ 1% THD+N): 3000 W x 1
- Includes Bass Control Knob
-
VFL Audio VFLCOMP3K 3000 Watt Mono Class-D Competition Amplifier$449.99- 3000 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 3000 watts RMS x 1 Channel (1 ohm)
- 1500 watts RMS x 1 Channel (2 ohms)
- 750 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
-
Audiopipe APCLU-M25001D 2500 Watt Class D Mono Amplifier$481.99Out of stock- Audiopipe APCLU-M25001D 2500 Watt Class D Mono Amplifier
- 2500W RMS @ 1 ohm
- 1682W RMS @ 2 ohm
- 960W RMS @ 4 ohm
- 2 - Channel Low level RCA inputs
-
Orion XTRPRO23001DX Class D Monoblock Amplifier - 2300W RMS$489.99- Orion XTR series Class D Monoblock Amplifier
- 920W RMS @ 4 ohms
- 1350W RMS @ 2 ohms
- 2300W RMS @ 1 ohm
- High speed MOSFET power supply
- Classic Orion industrial design
- Heavy gauge wire / high power speaker terminals
- 12 db/octave Filters
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog