We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
1 Channel Car Amplifiers
To power up your sub-woofers, install a mono amplifier. Among many features of a mono amplifier are low frequency reproduction, built in bass boost and low pass filters. A class D mono amplifier brings out less heat, are more efficient and draws less current.
One channel car amplifier provide users with a single audio input/output selector to power one speaker. This device is great if you only need to power a large woofer or subwoofer.
-
Hifonics BRX2016.1D Brutus Series 2000 Watts Class D Mono-Block Amplifier$228.99- BRX2016.1D Brutus BRX Series Mono-Block Class-D Amplifier with 2000 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass EQ boosts from 0 to +10dB at 20 Hz - 80 Hz with variable width
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 1/0 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 700 watts x 1 channel
-
Soundstream T1.4000DL Tarantula Electro 4000 Watt 1 Channel Class D Amplifier$234.99- 4000 Watt 1 Channel Class D Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- Continuous Power Output (4 Ω): 700 Watts RMS x 1
- Continuous Power Output (2 Ω): 1300 Watts RMS x 1
- Continuous Power Output (1 Ω): 2000 Watts RMS x 1
- Includes Bass Control Knob
-
Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier$239.99- Audiopipe APCLE-18001D 1800 Watt Class D Mono Amplifier
- 1800 watts RMS x 1 Channel (1 ohm)
- 1150 watts RMS x 1 Channel (2 ohms)
- 750 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
- Amplifier is strap-able so that you can connect and bridge with another APCLE-18001D
-
Power Acoustik BAMF1-8000D 1-Channel Class-D 8000 Watt Car Amplifier$249.99Out of stock- BAMF Series Class D 1-Channel mono-block amplifier
- Strap-able allows you to bridge 2 of amps together
- Limited frequency response dedicated high-power subwoofer amplifier
- Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors
- Variable low-pass crossover
- 1 Ohm stable for maximum subwoofer output
- 8000 watts maximum output
- 4000 Watts x 1 channel @ 1-Ohm
-
Hifonics BRX3016.1D Brutus Series 3000 Watts Class D Mono-Block Amplifier$304.99- BRX3016.1D Brutus BRX Series Mono-Block Class-D Amplifier with 3000 Watts of power!
- Ultra-Fi MOSFET power supply
- Two LED indicators: green for power and red for protect
- Bass EQ boosts from 0 to +10dB at 20 Hz - 80 Hz with variable width
- Equipped with soft start sound function that helps reduce the load and makes start-up easier
- Requires 0 gauge power and ground wiring for installation
- Provides three way protection circuitry, which includes thermal, overload, and speaker short protection
- 4 ohms: 1000 watts x 1 channel
-
Soundstream T1.6000DL Tarantula Electro 6000 Watt 1 Channel Class D Amplifier$395.99- 6000 Watt 1 Channel Class D Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- Continuous Power Output (4 Ω): 800 Watts RMS x 1
- Continuous Power Output (2 Ω): 1400 Watts RMS x 1
- Continuous Power Output (1 Ω, ≤ 1% THD+N): 2500 W x 1
- Continuous Power Output (0.5 Ω, ≤ 1% THD+N): 3000 W x 1
- Includes Bass Control Knob
-
Audiopipe APCLE-30001D 3000 Watt Class D Mono Amplifier$477.99- Audiopipe APCLE-30001D 3000 Watt Class D Mono Amplifier
- 3000 watts RMS x 1 Channel (2 ohm)
- 1800 watts RMS x 1 Channel (4 ohms)
- 2 - Channel Low level RCA inputs
-
Audiopipe APCLU-M25001D 2500 Watt Class D Mono Amplifier$481.99Out of stock- Audiopipe APCLU-M25001D 2500 Watt Class D Mono Amplifier
- 2500W RMS @ 1 ohm
- 1682W RMS @ 2 ohm
- 960W RMS @ 4 ohm
- 2 - Channel Low level RCA inputs
-
Rockford Fosgate M1200-1D 1200 Watt Marine Class-D Mono Amplifier$499.99- It has 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
- It features a cast aluminum heatsink for effective heat dissipation.
- It comes with top mounted controls for ease of use.
- It features a tri-stage protection covers thermal, over-current and short circuits.
- It includes an infrasonic filter and remote PLC (Punch Level Control).
- It delivers 12dB/octave Butterworth crossover and 4 Gauge power/ground connectors.
-
Audiopipe APDLO-3001D 3000 Watt Class D Mono Amplifier$529.99- 3000W RMS Monoblock Class-D Amplifier
- 1 ohms: 3000W x 1 channels
- 2 ohms: 2178W x 1 channels
- 4 ohms: 1444W x 1 channels
- One Pair of Low level RCA inputs
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog