Replace Factory Radio - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Metra TYTO-02 2013 and Up Toyota amplified audio system interface$110.99- Integrates with Toyota Amplified audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
-
Metra CHTO-03 2007 - and Up Chrysler, Dodge, Jeep, Mitsubishi Car Stereo interface kit$110.99- Easily remove the factory stereo in an otherwise impossible situation
- Interface provides accessory power
- Interface retains R.A.P. (retained accessory power)
- Compatible with amplified, non-amplified systems, or digital amplified factory audio systems
- Steering wheel control outputs
- Provides Navigation outputs for aftermarket navigation systems
-
Axxess AX-MB1-SWC 2001 - and Up Mercedes Benz radio replacement interface with steering wheel and navigation outputs$110.99Out of stock- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Metra HDCC-01 Honda Clock retention interface$110.99- Fits 2012 - 2013 select Honda vehicles
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Pac C2R-Vw2 Radio Replacement Interface With Navigation Outputs For Select Volkswagen Vehicles$111.99Pac C2R-Vw2 Radio Replacement Interface With Navigation Outputs For Select Volkswagen Vehicles Learn More -
PAC C2R-CHY4 Radio Replacement Interface for select Chrysler, Dodge, and Jeep CAN-Bus vehicles$111.99- Designed to allow the easy installation of an aftermarket car stereo in Chrysler, Dodge, and Jeep vehicles
- Replicates factory warning chimes & provides a data-bus generated 12V accessory power output that is fully compatible with GM ’s retained accessory power system
- Keeps the radio powered after key-off
- Issues data commands that maintain a health system status to other vehicle’s systems
- Retains all warning chimes including backup chimes, memory seats, low fuel, door/hatch ajar & others
-
PAC OS-1 OnStar Adaptor Radio Replacement Interface Cadillac, Chevrolet, GMC, Pontiac and Oldsmobile 1998-2002 Vehicles$111.99PAC OS-1 OnStar Adaptor Radio Replacement Interface Cadillac, Chevrolet, GMC, Pontiac and Oldsmobile 1998-2002 Vehicles Learn More -
Axxess AX-TYAMP1-SWC 2003 - and Up Toyota radio replacement interface with steering wheel and navigation outputs$118.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Built in steering wheel interface controller
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified audio systems
-
Axxess AX-MAZ1-SWC Mazda radio replacement interface with steering wheel and navigation outputs$120.99- Mazda complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Designed for amplified and non-amplified models, or when bypassing a factory amp
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Metra MITO-03 2014 - and Up Mitsubishi amplified audio system interface$122.99- Designed for Mitsubishi amplified audio systems
- Retains the factory amplifier and integrates it with an aftermarket radio
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - RCA level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
-
Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-TYAMP2-SWC 2012 - and Up Toyota radio replacement interface with steering wheel and navigation outputs - (Amplified Audio)$123.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems
-
Metra GMOS-10 2003-2006 Cadillac Cuts Six$123.99Metra GMOS-10 2003-2006 Cadillac Cuts Six Learn More -
PAC C2R-FRD1 Radio Replacement Interface for Ford$123.99PAC C2R-FRD1 Radio Replacement Interface for Ford Learn More -
Pac OS-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems$123.99Out of stockPac Os-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems Learn More
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog