Replace Factory Radio - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Metra LC-BMRC-01 Car Stereo Interface for 2006 - 2015 select BMW and Mini vehicles with chime retention speaker$65.99- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
-
Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
-
Pac OS-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems$123.99Out of stockPac Os-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems Learn More -
Metra GMOS-09 2000 - 2004 GM OnStar Class II Data Bus Interface for Amplified Audio Systems$123.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in Non-Amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Fits select Oldsmobile and Pontiac vehicles with amplified audio systems
-
Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
-
Metra CHTO-02 2004 - 2007 Chrysler/Dodge amplified data interface$129.99- Interface for Dodge and Chrysler vehicles with factory amplifiers and data-bus systems
- Provides output signals from factory bus system
- Provides constant 12 volt output
- Provides accessory 12 volt output
- Retains retained accessory power while doors remain closed
- Prewired for Metra ASWC steering wheel interface
- Provides 4 - speaker connections
- Provides parking brake, reverse, mute, V.S.S. connections Learn More
-
Axxess AX-HYKIA2-SWC 2012 - 2016 Hyundai Veloster radio replacement interface with steering wheel and navigation outputs$129.99- Hyundai Veloster complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
-
idataLink ADS-MRR Maestro RR Radio Replacement Interface with Steering Wheel Controls$139.99- Radio Replacement Interface with Steering wheel Control and Factory Amp Integration
- Allows for integration of factory steering wheel controls and factory amplifier with an aftermarket stereo
- Retains OnStar, SYNC and uConnect in select vehicles
- Before installing you must program the adapter at the iDatalink site to work with your particular vehicle
-
Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
-
Axxess AX-HYKIA4-SWC 2010 - 2013 Hyundai / Kia radio replacement interface with steering wheel and navigation outputs$201.99- 2010 - 2013 Hyundai / Kia complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Retains the factory AUX-IN jack
- Retains the factory backup camera
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog