Replace Factory Radio - Metra - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Metra AFSI-01 Ford SYNC Retention Interface with Navigation Output Wires with OLED display$11.99Out of stock- Complete car stereo integration harness for Non-Amplified audio systems
- Provides 12 volt 10 amp car accessory
- Provides RAP (Retained Accessory Power)
- High level speaker inputs for connections to factory speakers
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Retains OEM Bluetooth system
-
Metra CHRY-AMP-01 2005-07 Add An Amp To Existing Amp System$22.99Metra CHRY-AMP-01 2005-07 Add An Amp To Existing Amp System Learn More -
Metra LC-GMRC-01 Economy Radio Replacement Data Bus interface with Chime Retention Speaker$54.99- Designed for GM vehicles with Class 2 data buss
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Does not retain OnStar
- Retains all factory warning chimes with built in speaker
-
Metra LC-GMRC-LAN-03 Economy Data Bus interface with Chime Retention Speaker$54.99- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- For select Chevrolet, Pontiac, and Saturn vehicles
-
Metra XSVI-1731-NAV 2016 - and Up Honda Civic Radio interface with Navigation outputs$55.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2016 - and Up Honda vehicles
- Provides accessory output
- Retains the factory backup camera
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
-
Metra LC-GMRC-LAN-10 Economy Data Bus interface with Chime Retention Speaker$55.99- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Retains factory back up camera
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
-
Metra LC-GMRC-LAN-01 Economy Data Bus interface with Chime Retention Speaker$56.99- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- For select Buick, Cadillac, Chevrolet, GMC, Pontiac, Saturn, and Suzuki vehicles Learn More
-
Metra XSVI-6515-NAV 2012 - 2015 Fiat 500 Radio interface with Navigation outputs$62.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2012 - 2015 Fiat 500 vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with both amplified and non-amplified audio systems
-
Metra LC-BMRC-01 Car Stereo Interface for 2006 - 2015 select BMW and Mini vehicles with chime retention speaker$65.99- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
-
Axxess XSVI-1784-NAV 2007 - 2013 Sprinter Van Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Prewired for ASWC steering wheel interface
-
Metra XSVI-6522-NAV 2007 - and Up Chrysler CAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2007 - and Up Can-Bus Chrysler vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
-
Metra XSVI-6502-NAV 2004 - 2010 Chrysler Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2004 - 2010 Chrylser vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Provides steering wheel interface outputs
-
Metra XSVI-5520-NAV Car Stereo Interface harness and control box for 2006 - and Up Ford with Navigation$65.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony/ THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Includes a prewired ASWC-1 connector
-
Metra XSVI-2105-NAV 2006 - and Up GM LAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - and Up LAN-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface
-
Metra XSVI-2104-NAV 2006 - 2012 General Motors GM-LAN Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - 2012 GM-LAN Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog