Spring Forward Sale! View deals

Kenwood KAC-D5101 1000 Watt Class D Monoblock Amplifier

100 % of 100
In stock

Key Features

  • 1000 Watt Class D Monoblock Amplifier
  • 4-ohm / 2-ohm stable
  • 500W x 1 @ 2 Ω
  • 300W x 1 @ 4 Ω
  • Signal sensing turn on
Unit includes: Monoblock Amplifier, Installation Hardware and Instruction Manual

Kenwood KAC-D5101 1000 Watt Class D Monoblock Amplifier
  • 1000 Watt Class D Monoblock Amplifier
  • Amplifier will operate with 2 ohm or 4 ohm loads
  • 200mV-5V High Speaker Level or Low Level RCA Inputs
  • Extruded aluminum heat sink design
  • Speaker Level Input for easy integration to factory audio systems
  • Signal Sensing Turn-on for easy integration to factory audio systems
  • 8 Gauge power wire recommended
  • Fuse - 20A x 2
    Pre-Amp features:
  • Frequency Response - 20Hz - 200Hz
  • Signal to Noise Ratio - >85dB
  • Gain Adjust - 200mV - 5V
  • Total Harmonic Distortion - 1.0%
  • Variable Low-pass Crossover Frequency - 50Hz - 200Hz
  • Variable Low-pass Crossover Slope - (dB/oct): 24dB/octave
  • Variable Bass Boost @ 40Hz (0 - 18 dB)
    Inputs and Outputs:
  • One-channel operation (2-Channel input)
  • 1 Pair RCA low level inputs
    Max Power Output:
  • Total Power Output: 1000 Watts
    RMS Power Output:
  • 500W x 1 @ 2 Ω
  • 300W x 1 @ 4 Ω
  • Overall Dimensions: 2-3/16 inch (H) x 7-3/8 inch (L) x 6-11/16 inch (W)
More Information
Manufacturer Kenwood
Part Number KAC-D5101
Amplifier Topology Class Class D
Number of Channels 1 Channel
Total RMS Power at 1 ohm 0.00
Total RMS Power at 2 ohm 500.00
Total RMS Power at 4 ohm 300.00
RMS Output per Channel (x1 at 4 ohms) 300.00 Watts
RMS Output per Channel (x2 at 4 ohms) 0.00 Watts
RMS Output per Channel (x4 at 4 ohms) 0.00 Watts
Total Peak Power Output 1,000.00 (Watts)
Amplifier Bridging Not Bridgable
Minimum Impedance in Bridged Mode Not Bridgeable
Minimum Impedance in Un-Bridged Mode 2 ohm
Strappable Amplifier No
RCA Pre-amp Audio inputs 1 Pair
RCA Pre-amp Audio outputs None
Preamp voltage 5 volts
Speaker level inputs Yes
Gain Control Yes
Bass Knob / Remote Gain No
Built in Crossover Low-pass
Cooling Fan No
Color Silver
Warranty 1 Year
Recommended Power Wire Gauge 8 Gauge
Overall Height 2.19 inches
Overall Length 7.38 inches
Overall Width 6.69 inches
CEA2006 Compliant No
UPC Code 019048226327
Return period 30 days
Exchange period 30 days
Write Your Own Review
You're reviewing:Kenwood KAC-D5101 1000 Watt Class D Monoblock Amplifier
Your Rating
Customer Questions
No Questions
Have a question? Go ahead and ask anything. We are here to help. Please login to ask a product question.

Car amplifier installation

We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.

Amplifier Installation basics

Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.

How to choose the proper wire size explained

What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.

How to wire speakers and subwoofers to your new amplifier

In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.

What is gain? How do I set it properly?

In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.

We found other products you might like!
©2003-2022 Mobile Electronics Display and Accessories Co., Inc.