We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
VFL Audio VFLCOMP8K 8000 Watt Mono Class-D Competition Amplifier
- 8000 Watt Mono Class-D Competition Amplifier
- Stable down to 1-ohm
- 8000 watts RMS x 1 Channel (1 ohm)
- 4000 watts RMS x 1 Channel (2 ohms)
- 2000 watts RMS x 1 Channel (4 ohms)
- Strap-able for ridiculous power output
VFL Audio VFLCOMP8K 8000 Watt Mono Class-D Competition Amplifier
- Features:
- 8000 Watts Max Power
- Stable down to 1-ohm
- Pulse Width Modulated MOSFET Power supply
- Double side PCB with high quality SMD components
- Oversized toroids Power supply for excellent current and voltage control even under the highest demands
- Amplifier is strap-able so that you can connect and bridge with another for additional power output (2 ohm - 4 ohm load only)
- Nickel plated terminals for all connections
- Accepts up to 16 volts DC input for maximum sound output
- Frequency Response: 20Hz to 350 Hz
- Total Harmonic Distortion (4 Ω): < 0.15%
- Signal-to-Noise Ratio (IHF-A Weighted, at 40 Hz): >70dB
- Minimum Dual 0 Gauge power wire with 1400 amp fuse
- Protection circuits
- 3-Way Protection circuit
- Internal temperature and automatically lowers input level to prevent heat damage
- Short circuit protection prevent damage when speaker leads are shorted
- Overload protection prevent damage from low impedance or blown woofers
- Internal crossovers
- Variable Low Pass filter: 35Hz - 250Hz at 24dB per octave
- Variable Subsonic High Pass filter: 10Hz - 50Hz at 24dB per octave
- Audio controls
- Variable phase control: 0° - 180° phase control
- Variable Bass boost controls: 0 - +9dB at 45Hz
- Inputs and outputs
- 1 - 2 channel RCA input accepts up to 6 volt input signals
- 1 - 2 channel RCA output
- 1 - Strap-able data connection
- 1 - Remote bass control input
-
RMS Power Rating:
- 4 ohms: 2000 watts x 1 channels
- 2 ohms: 4000 watts x 1 channels
- 1 ohms: 8000 watts x 1 channel
-
Dimensions:
- Dimensions: 32-1/4" (L) x 2-1/4" (H) x 9-1/2" (D)
Manufacturer | VFL |
---|---|
Part Number | VFLCOMP8K |
Amplifier Topology Class | Class D |
Number of Channels | 1 Channel |
Total RMS Power at 1 ohm | 8,000.00 |
Total RMS Power at 2 ohm | 4,000.00 |
Total RMS Power at 4 ohm | 2,000.00 |
RMS Output per Channel (x1 at 2 ohms) | 8,000.00 Watts |
RMS Output per Channel (x1 at 1 ohms) | 4,000.00 Watts |
RMS Output per Channel (x1 at 4 ohms) | 2,000.00 Watts |
Total Peak Power Output | 9,000.00 (Watts) |
Amplifier Bridging | Not Bridgable |
Minimum Impedance in Un-Bridged Mode | 1 ohm |
Strappable Amplifier | Yes |
Strappable Power Output | 19000 |
RCA Pre-amp Audio inputs | 1 Pair |
RCA Pre-amp Audio outputs | 1 Pair |
Preamp voltage | 200 mV - 6 V |
Speaker level inputs | No |
Gain Control | Yes |
Bass Knob / Remote Gain | Yes |
Built in Crossover | Low-pass, Sub-sonic |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 0 Gauge |
Overall Height | 2.25 inches |
Overall Length | 32.25 inches |
Overall Width | 9.50 inches |
CEA2006 Compliant | No |
UPC Code | 636823699239 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.