Rockford Fosgate R1200X1D 1200 Watt Single Channel Class D Car Amplifier
Expert Knowledge
Talk to a specialist
- 1200 Watt Prime Series Monoblock Class D Car Amplifier
- 1200 watts RMS x 1 Channels at 1 ohms
- 800 watts RMS x 1 Channels at 2 ohms
- High level input capable with an Muted Turn-On circuit
- On-board Punch equalizer and is remote Punch Level Control ready
- Hidden top mounted control panel and a cast aluminum heatsink
Features:
- 1200 Watt Prime Series Single Channel Class D Car Amplifier
- Top mounted controls
- MOSFET power supply for large power output
- LED indicators for Power and Protect
- Remote Punch Level Control
- Provides two-way protection circuitry, which includes overload and speaker short circuits
- Heavy-duty extruded cast aluminum heat sink for utmost heat dissipation
- Requires minimum 4 gauge power and ground wiring for installation
- CEA-2006 compliant amplifier
- Frequency Response: 20Hz to 250Hz +/- 1.0dB
Inputs and Outputs:
- Single-channel operation
- Nickel-plated RCA level inputs and outputs
- Input sensitivity is 150mV to 4V
- Screw Terminal 12 AWG speaker connections
- Screw Terminal 4 AWG power connections
RMS Power Output:
- 4-Ohms: 400 Watts x 1
- 2-Ohms: 800 Watts x 1
- 1-Ohms: 1200 Watts x 1
- Total Power Output: 1200 Watts
Max Power Output:
- 4-Ohms: 499 Watts x 1
- 2-Ohms: 898 Watts x 1
- 1-Ohms: 1400 Watts x 1
Tone Controls:
- Optional PLC2 wired remote bass level control
- Punch EQ2 Bass Boost: 0dB to +18 dB at 45 Hz
- Variable Phase Control: 0° to 180°
Built in Crossover:
- Low Pass: 50Hz - 250Hz @ 12dB/octave
Dimensions:
- Overall Dimensions: 1.98” (H) x 11.06” (D) x 6.77” (W)
| Manufacturer | Rockford Fosgate |
|---|---|
| Part Number | R1200-1D |
| Amplifier Topology Class | Class D |
| Number of Channels | 1 Channel |
| Total RMS Power at 1 ohm | 1,200.00 |
| Total RMS Power at 2 ohm | 800.00 |
| Total RMS Power at 4 ohm | 400.00 |
| Total Peak Power Output | 1,400.00 (Watts) |
| Amplifier Bridging | Not Bridgable |
| Minimum Impedance in Un-Bridged Mode | 1 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 1 Pair |
| RCA Pre-amp Audio outputs | 1 Pair |
| Preamp voltage | 4 volts |
| Speaker level inputs | Yes |
| Gain Control | Yes |
| Bass Knob / Remote Gain | Optional |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 4 Gauge |
| CEA2006 Compliant | No |
| UPC Code | 780687333140 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
