Replace Factory Radio - Ford Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- Metra TurboWires 70-5514 Amplified Bypass Harness for 1989 - 1997 Ford / Lincoln / Mazda / Mercury / Nissan vehicles$22.99
- Amplifier bypass wiring harness for 1989 - 1997 Ford / Lincoln / Mazda / Mercury / Nissan vehicles
- Harness is designed to bypass the Premium Audio amplifier
- Uses the new radio or aftermarket amplifier to power speakers
- Plugs into car harness at radio and run to the factory tuner
- Metra TurboWires 70-1768 Wiring Harness Ford, Lincoln and Mercury 1986-1993 Vehicles$22.99Metra TurboWires 70-1768 Wiring Harness Ford, Lincoln and Mercury 1986-1993 Vehicles Learn More
- Metra 70-5520AUX Auxiliary Audio Input Retention Harness for select Ford Vehicles$23.99
- Harness is designed to retain the factory 3.5mm jack and converts that to RCA audio leads for use with an aftermarket car stereo
- Plugs into car harness at radio
- 6 inch cable length
- 16-pin plug
- Metra 70-5520AV for Ford, Lincoln, Mercury, Mazda 2002-2004 Wiring Harness$23.99Metra 70-5520AV for Ford, Lincoln, Mercury, Mazda 2002-2004 Wiring Harness Learn More
- Metra TurboWires 70-5602 Car Stereo Wiring harness for 1986 - 2001 Ford Premium Audio Systems$26.99
- Used to install and aftermarket car stereo without cutting stock connections
- For vehicles with premium audio systems and factory amplifier
- Bypasses the factory amplifier and uses the aftermarket car stereo to power the speakers
- Uses high level speaker outputs for speaker connections
- Metra TurboWires 70-5715 Wiring harness for 1996-2004 Ford Taurus/Mercury Sable$28.99
- Used when replacing factory radio with an aftermarket radio
- Provides speaker connections to factory tuner location which is seperate from factory radio location
- Requires no cutting of factory wiring
- Metra TurboWires 70-5601 for Ford, Lincoln, Mercury 94-97 Wiring Harness$30.99
- Tuner bypass wiring harness for 1994-1997 Ford, Lincoln, and Mercury vehicles with JBL audio system
- Extends the Antenna for use on vehicles without factory antenna connector at the radio
- Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed.
- Plugs into car harness at radio and run to the factory tuner
- Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99
- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- idataLink Maestro HRN-HRR-FO2 Radio Replacement and Steering Wheel Interface Harness for 2011 - 2018 Ford Vehicles$72.99
- Fits select 2011 - 2018 Ford Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra XSVI-5524-NAV 2011 - and Up Ford Radio interface with Navigation outputs$81.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2011 - and Up Ford vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
- Axxess AX-FD1-SWC 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$130.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-FD2-SWC 2011 - and Up Ford radio replacement interface with steering wheel and navigation outputs$139.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains SYNC audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for non-amplified audio systems
- Axxess AXTC-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$139.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Metra AFSI-02 Ford SYNC Retention Interface with Navigation Output Wires without display$147.99
- Complete car stereo integration harness for Non-Amplified audio systems
- Provides 12 volt 10 amp car accessory
- Provides RAP (Retained Accessory Power)
- High level speaker inputs for connections to factory speakers
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Retains OEM Bluetooth system